Dowel hole drilling machine

Ganner DB 21

Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with:

- Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation.
- Automatic return of the drilling unit after reaching the preset drilling depth.
- Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm).
- 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover.
- Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders.
- 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height.

Ideal fence system consisting of:
- 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops.
- Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32.
- Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table.
- Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling.
- Clamping arms for the clamping beam enable line boring positions up to max. 300 mm.
- Optimized three-stage tool system.

Includes 1 set of dowel drill bits:
Bedpfjxnlflox Ahujcw
- 5 carbide dowel bits, Ø 8x77 mm, right
- 4 carbide dowel bits, Ø 8x77 mm, left

Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with:
- Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation.
- Automatic return of the drilling unit after reaching the preset drilling depth.
- Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm).
- 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover.
- Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted.
- 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high.
- Ideal stop system comprising:
- 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32.
- Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table.
- Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations.
- Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm.
- Three-stage optimized tool system.

Extraction funnel, dust tested, Ø 120 mm
1 set for line boring in system.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.