Wafer Stick Machine Model EWB 1/1Franz Haas
EWB 1/1
Wafer Stick Machine Model EWB 1/1
Franz Haas
EWB 1/1
EXW VB به اضافه مالیات بر ارزش افزوده
€۱۱۳٬۰۰۰
وضعیت
کارکرده
موقعیت
Latkowo 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
EXW VB به اضافه مالیات بر ارزش افزوده
€۱۱۳٬۰۰۰
- موقعیت:
- Latkowo 40, Inowrocław, Polska, 88-100 Inowrocław, Polska

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A21566483
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۳.۰۱.۱۴۰۵
توضیحات
Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished.
The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel).
The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new.
Fans have been replaced with new units.
Kodpfx Ageywgaxobeww
The exhaust outlet and flange have been replaced for quick installation.
The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping.
Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible).
The oven includes a stainless steel batter tank mounted on a frame with a trolley.
Fitted with pumps that feed batter from the tank onto the ring surface.
Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters.
Dimensions: length 3200 mm, width 1400 mm, height 1700 mm.
The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50).
Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh.
The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency.
Output: approx. 120-150 kg per 8 hours.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel).
The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new.
Fans have been replaced with new units.
Kodpfx Ageywgaxobeww
The exhaust outlet and flange have been replaced for quick installation.
The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping.
Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible).
The oven includes a stainless steel batter tank mounted on a frame with a trolley.
Fitted with pumps that feed batter from the tank onto the ring surface.
Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters.
Dimensions: length 3200 mm, width 1400 mm, height 1700 mm.
The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50).
Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh.
The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency.
Output: approx. 120-150 kg per 8 hours.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
آخرین بار آنلاین: امروز
ثبت شده از: 2026
۱ آگهی آنلاین
ارسال درخواست
تلفن & فکس
+48 52 35... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است
























