Vegetable profiler to make spheresFormit
Pro-X
Vegetable profiler to make spheres
Formit
Pro-X
وضعیت
کارکرده
موقعیت
Mezőszemere 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- Szabadság út 80., 3378 Mezőszemere, HU

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A16698871
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۸.۱۰.۱۴۰۳
توضیحات
Formit PRO X
The FORMIT ProX is designed from aluminium (anodized) and stainless steel. The profiler is suitable for smaller installations with a ready product production capacity of up to 150 kg/ hour.
The ProX profilers are suitable for producing balls sized between 17 and 33 mm.
The feeding of the raw material into the ProX is important for successful production results. It is recommended to place a good speed controlled conveyor in front of the profiler.
Raw materials, such as potatoes and carrots (cut), can be successfully used. Cube shaped raw material can also be used.
It is recommended to pre-peel all the raw material before use. Pre-peeled raw material improves the quality of the final product, increases the capacity and extends the user-life of the cutting edges on the shaping rolls.
Lredot Sxt Depfx Advsu
After the shaping process, it is recommended that the products are washed.
For removal of the secondary product, we recommend the installation of a pump or some other transportation system underneath the machine. When producing balls from a pre-peeled product of a good size, the quantity of the secondary product may be almost the same as the primary product produced.
The FORMIT ProX is designed from aluminium (anodized) and stainless steel. The profiler is suitable for smaller installations with a ready product production capacity of up to 150 kg/ hour.
The ProX profilers are suitable for producing balls sized between 17 and 33 mm.
The feeding of the raw material into the ProX is important for successful production results. It is recommended to place a good speed controlled conveyor in front of the profiler.
Raw materials, such as potatoes and carrots (cut), can be successfully used. Cube shaped raw material can also be used.
It is recommended to pre-peel all the raw material before use. Pre-peeled raw material improves the quality of the final product, increases the capacity and extends the user-life of the cutting edges on the shaping rolls.
Lredot Sxt Depfx Advsu
After the shaping process, it is recommended that the products are washed.
For removal of the secondary product, we recommend the installation of a pump or some other transportation system underneath the machine. When producing balls from a pre-peeled product of a good size, the quantity of the secondary product may be almost the same as the primary product produced.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2022
ارسال درخواست
تلفن & فکس
+36 20 48... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است



