Window spraying plant

FINITURE Pro Flow Impraegnieranlage

Length 2700 mm
Width 1100 mm
Height 850 +- 150 mm
engine output 0,37 kW
Electric capacity 0,5 kw
compressed air 6 bar
Horizontal impregnation system 'Pro flow' for individual parts with rinsing
circuit.
-----
Features:
Machine for horizontal flooding of individual parts. The product will go through
flooded a row of nozzles. The excess product is then removed through air jets
blown off.
The pump and the air nozzles are controlled automatically and only then
operated when the workpiece passes through. In this way the
Compressed air consumption reduced. The circulation operation ensures minimal
product consumption.
-----
Construction features:
structure
Sturdy steel frame, painted with high-strength, water-soluble products.
Machine body made of heat-sealed, thick polypropylene plates.
4 independent chambers for inlet, flooding, blow-off and outlet.

Horizontal feed of the workpieces
By motor-driven rollers made of plastic with grooves.
Electrical converter for controlling and changing the conveying speed.

transmission
The machine is equipped with an exclusive system so that all
Gear located outside the flood chamber and easily accessible to the
Operators are to guarantee a longer service life and the
to facilitate maintenance operations.
The moving components are protected by cover plates and appropriate
Iodpfx Acenl Nqqoyeih
seals protected.
circulation pump
Pneumatic double diaphragm pump made with valves, seals and diaphragms
Nitrile rubber and housing made of plastic material (PVDF).

air jets
A blow-off system is present in the first chamber to prevent product leakage
avoid.
A second blow-off system after the flood chamber blows off the excess product
from the workpiece.

Electrical panel
According to CE, degree of protection IP 55. Including inverter to the
set feed rate.

technical features
Length mm 2700
Width mm 1100
Conveyor speed (min./max.) m/min 3-6
Motor power train group kW 0.37
Installed electrical power kW 0.5
Distance between infeed and outfeed rollers mm 2520
Working height (adjustable) mm 850 +- 150
Min. length of the workpieces to be flooded mm 250
Max. width of the workpieces to be flooded mm 300
Max. height of the workpieces to be flooded mm 250
Compressed air consumption lt/min 2000
Pressure of the required compressed air bar 6

Equipment and available accessories
Flushing circuit for Pro Flow
-----
Price of the above machine: on request!

plus packaging and transport
-----
(Technical information according to the manufacturer - without guarantee!
Illustrations may be dated
Deviate from the original, prices net, plus VAT (domestic))