نیمه یدک‌کش با سکوی کاری

ES-GE 3-Achs Sattelanhänger - Rungen + CV

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Extract from the equipment. Full equipment details on request.

Chassis:
* Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads
* Underrun bar width approx. 700 mm
* Outer frame as UNP profile
* Wear plate approx. 8 mm
* Neck height at the front approx. 130 mm

Towing Device
* 2” kingpin

Underrun Protection
* Bolted version, compliant with EU regulations

Side Guard Protection
* EU-compliant, made of anodized aluminium profiles

Landing Legs
* 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR)

Axles
* 3 x 9 t air-suspension axles
* 22.5" disc brakes
* Total lift approx. 180 mm
* Lift and lowering mechanism operated via rotary slide valve

Braking System
* Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control
* Spring-loaded cylinders as parking brake
* Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor

Tyres
* 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120
* Make of our choice
* Tyre pressure monitoring system (TPMS) via EBS CAN-bus system

Mudguards
* EU-compliant

Spare Wheel Carrier
* None

Load Securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t
* Approx. every 400–600 mm in the external frame, holes for attaching tension straps

Front Wall
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high)

Floor
* Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles

Lighting System
* EU-compliant, 24 volts, with multi-chamber lights
* LED side marker lights
* LED position lights white at the front
* LED outline marker lights at the rear
* Number plate lights
* Lane marker lights LED
* 1 x 15-pin and 2 x 7-pin connectors at the front cross member

Equipment
* 2 wheel chocks with holder
* ECE 70 warning plates
* Beacon mounting bracket incl. rotating beacon
* 2 rubber buffers at the rear
* Folding and extendable rear access ladder on the right (without platform)
* 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles

Paintwork
* Front wall: RAL colour of your choice
* Chassis: hot-dip galvanized
* Outer frame: hot-dip galvanized + RAL colour of your choice
* Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white)
Cjdpfx Abjugqvfjfjrh
* Add-on parts: galvanized / black KTL coated
* Rims: silver
* Contour marking: complete yellow

Including special equipment
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets crosswise to the loading area
* 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm
* Magazine for 20 plug-in stakes inside the front wall
* Container locks for 1 x 40' and 2 x 20' containers, rear flush
* Container lock for 1 x 20' container in the center
* Working headlight at the lamp support (switched via reverse gear)
* 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.