Brusch sanding machine ERNST BM2 - 1300

Ernst

Technical Data:
Djdpfx Aszubpaoa Ijku

- Manufacturer: Ernst
- Type: BM 2 - 1300
- Year of Manufacture: 1998
- Max. brush width: 1,300 mm
- Max. brush diameter: 400 mm
- Max. working height: 100 mm
- Brush motors: 2 × 5.5 kW
- Vacuum motor – rated power 7.5 kW
- Vacuum motor – speed 2,800 rpm
- Height adjustment motor – rated power: 0.45 kW
- Height adjustment motor – speed 1,410 rpm
- Brush speed 30-350 rpm
- Feed rate 3-15 m/min.
- Weight: 1900 kg

2.5 ELECTRICAL CONNECTION
- Operating voltage 400 V
- Frequency 50 Hz
- Fuse to be provided by the customer: 63 A
- Full load current: 47 A
- The cross-section of the supply cable
must be at least AWG 2 (25 mm2).

2.6 PNEUMATIC CONNECTION
- Operating pressure 6–8 bar
- Maximum pressure 8 bar

2.7 EXHAUST CONNECTION
- Connection size 4 x Ø = 140 mm
- Air requirement 1,108 m3/h per connection
- Minimum air velocity at the connection on the machine 20 m/s
- Vacuum at the exhaust connection 1,180 Pa
For blowing device:
- Connection size 3 × Ø = 80 mm
- Air requirement 390 m3/h per connection
- Minimum air velocity at the connection on the machine 20 m/s
- Vacuum at the exhaust connection 950 Pa
- Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.