Orbital riveting machine double-rivet automatic with rotary indexing table, rotary table, rotary divDUNKES
DN 4
Orbital riveting machine double-rivet automatic with rotary indexing table, rotary table, rotary div
DUNKES
DN 4
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۳٬۰۰۰
وضعیت
کارکرده
موقعیت
Hessisch Lichtenau 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Orbital riveting machine double-rivet automatic with rotary indexing table, rotary table, rotary div
- تولید کننده:
- DUNKES
- مدل:
- DN 4
- وضعیت:
- کارکرده
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۳٬۰۰۰
- موقعیت:
- 37235 Hessisch Lichtenau

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A3847131
- شماره مرجع:
- 54191
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۱.۱۱.۱۴۰۴
توضیحات
Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4
Rotary table with SIEMENS control system
Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009
Rivet shank diameter max. 12 mm
Tool shank diameter 16 mm
Throat depth 190 mm
Rivet head stroke per riveting unit approx. 60 mm
Riveting spindle speed approx. 1,400 rpm
Tool-to-anvil installation height max. 80 mm
Compressed air requirement 6 bar
Motor power per riveting unit 1.1 kW
Power supply 380 Volt, 50 Hz
- Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control
- Double riveting unit is adjustable within the machine frame relative to the indexing table
- Table diameter Ø 295 mm for accommodating round workpieces
- Pneumatic riveting stroke motion
- Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch
- Modernization of the control system and retrofit with servo drive for the rotary table in 2009
- New electrical control cabinet with Siemens Simatic panel – built in 2009
- Riveting time infinitely programmable
- Riveting pressure infinitely adjustable via pressure gauge
Lsdpedzp T Nsfx Alzeaa
- Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm
Space required L x W x H 3200 x 1250 x 2400 mm
Weight approx. 2,500 kg
Good condition
The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm.
The segments were manually placed onto the carrier disc and fixed with straight rivet pins.
The opposing riveting unit simultaneously rivets the pin from both sides.
The controlled table automatically rotates to the next working position after each cycle.
Ideal for saw blade manufacturers and repair shops.
Alternatively suitable as a basis for constructing a special-purpose machine.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Rotary table with SIEMENS control system
Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009
Rivet shank diameter max. 12 mm
Tool shank diameter 16 mm
Throat depth 190 mm
Rivet head stroke per riveting unit approx. 60 mm
Riveting spindle speed approx. 1,400 rpm
Tool-to-anvil installation height max. 80 mm
Compressed air requirement 6 bar
Motor power per riveting unit 1.1 kW
Power supply 380 Volt, 50 Hz
- Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control
- Double riveting unit is adjustable within the machine frame relative to the indexing table
- Table diameter Ø 295 mm for accommodating round workpieces
- Pneumatic riveting stroke motion
- Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch
- Modernization of the control system and retrofit with servo drive for the rotary table in 2009
- New electrical control cabinet with Siemens Simatic panel – built in 2009
- Riveting time infinitely programmable
- Riveting pressure infinitely adjustable via pressure gauge
Lsdpedzp T Nsfx Alzeaa
- Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm
Space required L x W x H 3200 x 1250 x 2400 mm
Weight approx. 2,500 kg
Good condition
The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm.
The segments were manually placed onto the carrier disc and fixed with straight rivet pins.
The opposing riveting unit simultaneously rivets the pin from both sides.
The controlled table automatically rotates to the next working position after each cycle.
Ideal for saw blade manufacturers and repair shops.
Alternatively suitable as a basis for constructing a special-purpose machine.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
ارسال درخواست
تلفن & فکس
+49 5602 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Neunkirchen am Brand
۳٬۹۷۹ km
LORENZ + ARKUBRM 50/620.9 + AH 3000/ST-M
آگهی کوچک
Iszkaszentgyörgy
۳٬۴۰۵ km
ARISTECHCW30
آگهی کوچک
Tatabánya
۳٬۴۱۰ km
BRÜCK Bandhaspel Bandanlage WinderAH 12/1600 12000 kg x 1600mm (1463)
آگهی کوچک
Kaczynek
۳٬۳۹۶ km
AlzmetallAB 4 SV
آگهی کوچک
Łaziska Górne
۳٬۴۷۱ km
VermeerRT100 / 1 OWNER / NEW SERVICE!
آگهی کوچک
آلمان
۴٬۰۶۹ km
HenneckeHK135
آگهی کوچک
Eislingen/Fils
۴٬۰۶۴ km
WEINGARTENN 63
آگهی کوچک
Freudenberg
۴٬۲۳۵ km
SCHLEICHER
آگهی کوچک
Malsch
۴٬۱۶۸ km
LORENZSN 4
آگهی کوچک
Hessisch Lichtenau
۴٬۱۱۹ km
ALZMETALLAB 3 ESV
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است




















































































































