CTS climate test chamber CW-60/5.5, -60°C to +100°C, 5,500 liters (5.5 m³)

CTS Klimakammer CW -60/5,5

CTS
 
CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber
 
The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized,
walk-in or drive-in climate chamber for conducting temperature
and humidity tests on multiple test specimens simultaneously.
 
Device Description
The climate test chamber can be used to test the function or material properties of a test specimen
under temperature and humidity conditions.
The good air circulation, with a correspondingly high volume of recirculated air, guarantees
good transfer to the test specimen.
The air handling unit is located at the rear of the interior.
The units are located behind the device in a separate frame and are easily accessible.
The control system is housed in a separate control cabinet.
The control panel is integrated into the control cabinet door.
To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer.
The test chamber can be purged with fresh air via a fan.
 
Technical Performance Data:
 
Temperature Tests:
Temperature range -60 °C to +100 °C
Temperature deviation ±0.5 to 1 K over time
Temperature change rate, linear with test specimen
and with heat radiation, measured in the supply air
Heating: 2 K/min from -40 °C to +85 °C
Cooling: 2 K/min from +85 °C to -40 °C
 
Climate Tests:
 
Temperature range +10 °C to +90 °C
Humidity range 10 % to 95 % relative humidity
in the dew point range +5°C to +89 °C
Temperature deviation ± 0.5 K over time
Humidity deviation ±1 - ±3 % r.h. over time
 
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400 V, without test specimen, without radiation, and without additional equipment.
 
Dimensions:
Internal dimensions (test chamber / usable space):
Volume: approx. 5,500 liters (5.5 m³)
 
Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm
External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm
 
Operating Data:
 
Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz
Rated power: 58.3 kW (incl. 5 sockets)
Rated current: 86.0 A
Protection class IP 54
 
Technical Design:
 
Refrigeration unit
water-cooled, low-noise, semi-hermetic,
stepless power adjustment through electronic
monitoring and control system,
environmentally friendly refrigerant R 23 / R 404 A
 
Notes
 
Inspection possible by arrangement (46325 Borken)
 
Kjdpfxozizmbe Amvenc
Shipping by freight forwarder possible – costs & organization on request
 
Scope of supply: (See picture)
 
(Changes and errors in the technical data are subject to change!)
 
We will gladly answer any further questions you may have by phone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.