H-TYPE 400/150 TON HYDRAULIC DEEP DRAW PRESS

CRONOSSTECH CHSP 400/150

CRONOSSTECH CHSP 400/150

H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways

General Description

The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The H-frame structure with 8 guideways provides maximum rigidity during the pressing cycle, and maintains parallelism and perpendicularity tolerances consistently over long strokes.

The CHSP 400/150 model, with a 400-ton main ram and 150-ton blank holder ram (pot), is designed for deep drawing and forming applications that require high tonnage. The frame is stress-relieved by vibration to ensure long-term durability and reliable operation.

⚙️ Standard Equipment

- Steel construction, H-frame body with 8 guideways
- Stress-relieved frame via vibration
- Bronze Zr14 guide slippers
- WPQR and WPS approved welding by TÜRK-AK accredited certification
(EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing conform to CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable ram and blank holder (pot) stroke control
- Adjustable ram and pot tonnage (pressure) control
- Automatic lubrication system
- Electronic filtration contamination warning
- Monitoring of hydraulic unit oil temperature and system status on display
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components

📐 Technical Specifications – CHSP 400/150

Type: Steel construction, H-frame body with 8 guideways
Frame Material: St52 – ERDEMIR
Guideway Liners: Bronze Zr14
Capacity (Ram): 400 Tons
Capacity (Pot): 150 Tons
Moving Table Dimensions: 1200 × 1500 mm
Fixed Table Dimensions: 1200 × 1500 mm
Parallelism Tolerance: 120 microns/m
Perpendicularity Tolerance: 60 microns/m
Stroke (Ram): 1000 mm
Stroke (Pot): 350 mm
Min. Open Height: 100 mm
Max. Open Height: 1100 mm
Stress Relieving: Vibration method
Welding Application: WPQR & WPS approved by TÜRK-AK accreditation
EN ISO 15614-1:2017
(Welding applications are supervised by certified "welding coordination engineers" per EN ISO 14731)

Max. Working Pressure: 250 Bar
Total Motor Power: 37 kW – IE3
Main Pump: 45 cm³ – REXROTH or PARKER
Rapid Descent Speed (Movable Table): 150 mm/s
Forming Speed (Movable Table): 12 mm/s
Return Speed (Movable Table): 170 mm/s
Forward Speed (Pot Table): 30 mm/s
Main Cylinder Internal Diameter: Ø450 mm – Ck45
Pot Cylinder Internal Diameter: Ø280 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 5600 mm
Approx. Press Width: 3250 mm
Ncjdpfx Ajx N Uhholior
Approx. Press Depth: 2200 mm
Lower Table Height from Floor: 1400 mm
Pre-fill Valve: NG 150
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC System: DELTA
Touch Screen Panel: DELTA 7”
Switchgear: SIEMENS – SCHNEIDER
Approx. Weight: 24 Tons

Production Note

This machine is manufactured by CRONOSSTECH in Turkey.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.