CNC milling machine C2131 IND

CORMAK Frezarka CNC CORMAK IND 2131 (2100x3100)

CNC MILLING MACHINE C2131 IND (working area 2100 x 3100 mm) dynamic and precise milling plotter based on components from global manufacturers equipped, among others, with spindle of Italian production HSD.

Work table

Sectional table with six independent vacuum sections, made of rigid and resistant HPL panels, controlled directly from the control cabinet,
Each section has holes into which the vacuum from the vacuum pump is fed via a system of tubes,
The main openings in the vacuum table have plugs to accommodate different material formats,

Table equipped with buffers in two axes! Pneumatic positioners to ensure that the material is always positioned in the same place,

Spindle

High-quality brushless spindle from a renowned manufacturer, 9 kW, powered by inverter, with overload protection .
Milling electro-spindle with innovative AIR cooling system.
Lhedpfevup Unsx Agnon

3.Drive

Energy-efficient YASKAWA high-performance AC servo drives, controlled by a digital controller, provide excellent machining quality while maintaining high operating speeds in each direction,
Brushless AC servo motors driving the X, Y axes transfer the drive via high-performance planetary gears
The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw.
The door is moved along the X and Y axes by HIWIN guide rails and bevel gears, which guarantee many years of trouble-free operation, and are made of high-quality hardened and tempered steel.

Construction

The rigid table structure , made of ribbed steel, excludes vibrations during the production process.

5 Tool magazine and tool measuring sensor

The machine is equipped with a 12-position linear tool magazine, a set of ISO30 cones and ER32 bushings.
Toolholders included: ISO30 and toolholder sleeves of size:
1/2’ - 6 pcs; 1/8’ - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs.

6 Software, INDUSTRIAL CONTROL:

The machine is controlled by a SYNTEC industrial controller as in large machining centres. Included with the controller: keypad and LCD display. Optional latest software UCanCAM V12

Vacuum pump (optional) and extraction foot.

The use of a vacuum pump significantly increases the clamping force of the workpieces on the machine table, so that the material does not move.
The extraction foot is penumatic, located at the spindle, and allows the connection of any chip extractor, keeping the machining clean, safe and at the same time maintaining the precision of the work

Technical specifications
Working area 2100x3100 mm
Z axis 300 mm
Structure Arm in cast iron / table in welded steel
Drives hybrid servo motors (AC LEADSHINE) 1500W
Hybrid table
Spindle power 9 kW
Shimpo gearbox
Spindle speed 6000 to 24000 rpm
Power supply 400 V, compressed air min. 8 bar
Repositioning accuracy 0.01 mm
Linear bearing trapezoidal rails, Hiwin carriages
Material clamping vacuum, hybrid
Vacuum pump (optional) 7.5 kW, 8 independent vacuum sections
Software (optional) UCanCAM V12