Industrial orbital riveter

CHIRON Werke GmbH Tuttlingen (Made in West Germany)

Type/Designation: 307-153/714-750
Redpfx Ahjw T U Ubjusp

Serial Number: 82/293

Country of Manufacture: Made in West Germany (before 1990)

Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s):

Machine Type: Column drill / single-station drilling machine for metal

Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V)

Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched)

Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version)

Spindle Taper: usually MT2 or MT3

Feed: manual or mechanical (some models equipped with automatic feed)

Weight: several hundred kilograms (approx. 300–600 kg)

Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines)

Machine Table: cast iron, capable of securing workpieces

Full control panel – variable speed adjustment available

2. Key Working Head Parameters (important for riveting):

Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size)

Spindle/Slide Stroke (mm) – measure from top to bottom position

Daylight (working clearance: distance between tool tip and table at top position)

Throat Depth – from spindle axis to column (working reach)

Max. Rivet Diameter / Work Range – specify based on tests or prior use

Voltage: usually 380/400 V, 50 Hz

3. Dimensions and Logistics:

L×W×H (of base/overall, in cm)

Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating)

Weight (weigh with pallet jack with scale or estimate)

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.