MULTIFOILER Press

Buerkle M8

BURKLE MULTIFOILER Press Model M8 + STOLMAT Spray Booth Wall
Machine for covering flat and formed MDF furniture components with thermoplastic foils.
Basic machine data:
• Electrical connection power: approx. 28 kW (without optional components),
• Operating voltage: 400 V, 50 Hz, 3-phase,
• Control voltage: 24 VDC,
• Required air pressure: min. 6 bar,
• Air connection diameter: min. 1 inch,
• Required air volume: max. 2880 l/min,
• Air consumption during pressing process:
◦ 4 bar forming pressure: approx. 720 l/cycle,
◦ Chamber filled to 50%: approx. 360 l/cycle.
Operating side: in the direction of feed, right-hand side.
Electrical equipment:
• In compliance with DIN/VDE (EN 60204) standards,
Iodewfz Nkjpfx Acyotn
• Electrical documentation according to VDE,
• Paint color: machine and control cabinet RAL 7035 light grey, decorative elements RAL 5002 blue.

Working materials:
• Material applied:
◦ PVC foils 0.30–1.0 mm,
◦ High gloss foils 0.50–1.0 mm,
◦ PET foils 0.35–0.60 mm.
• Material processed:
◦ MDF board (smooth or profiled surface),
◦ Board temperature: approx. +18°C,
◦ Board moisture content: approx. 6–8%,
◦ Board density: approx. 750 kg/m³.

Technology:
• Thermal forming without membrane,
• Working area: 1330 x 2430 mm,
• Maximum workpiece size: 1250 x 2350 mm,
• Minimum foil width: 1400 mm,
• Workpiece thickness: 6–35 mm (depending on part geometry).

STOLMAT Spray Booth Wall
1. Purpose of the device:
• Wall for extracting paint dust and vapors.
• For capturing dust generated during spray application of paints and lacquers onto furniture components.
• Designed for use with high-efficiency spraying equipment (spray gun).
• Filtration efficiency >96%, eliminating the need to clean exhaust ventilation ducts.
• Equipped with side covers ("tapacze") to improve extraction efficiency.

2. Technical data:
• Dimensions (LxWxH): 2500 x 2130 x 700 mm,
• Fan type: duct fan 500,
• Fan capacity: max 7500 m³/h,
• Max pressure: 400 Pa,
• Fan motor power: 1.85 kW,
• Voltage: 230/400 V,
• Number of fans: 1 unit,
• Filtration surface (1st stage – cardboard filter): 4.80 m²,
• Filtration surface (2nd stage – PS fiber filter): 2.50 m²,
• Dust filtration efficiency: >96%.

3. Technical description:
• The spray extraction wall is made of galvanized steel sheet, 1.5 mm thick.
• Wall elements are connected by screwing and sealed with acrylic mass.
• The fan is mounted on a wall bracket.
• Side covers ("tapacze") made of galvanized steel sheet.

4. Dust filtration parameters:
• Cardboard filter (labyrinth type):
◦ Class G3 (DIN 53438, EN 779),
◦ Thickness: 60 mm,
◦ Flow rate: 1200–3800 m³/h/m²,
◦ Filtration efficiency: 90–98%.
• PAINT STOP filter:
◦ Flow rate: 2500–6300 m³/h/m²,
◦ Filtration efficiency: 93–97%.