Complete sawmill (stationary)Brenta
Verticale bandzaag / automat. draaiwagen
Complete sawmill (stationary)
Brenta
Verticale bandzaag / automat. draaiwagen
EXW VB به اضافه مالیات بر ارزش افزوده
€۶۹٬۹۸۵
سال ساخت
۱۹۸۶
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Beilen 

اطلاعات دستگاه
- نام دستگاه:
- Complete sawmill (stationary)
- تولید کننده:
- Brenta
- سال ساخت:
- ۱۹۸۶
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
EXW VB به اضافه مالیات بر ارزش افزوده
€۶۹٬۹۸۵
- موقعیت:
- Beilen, هلند

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A21600703
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۹.۰۳.۱۴۰۵
توضیحات
We offer this used Brenta vertical bandsaw with an automatic turning carriage.
Year of manufacture: 1986
Vertical saw:
Type: Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type: Progress 750 Machine no.: 409621 S268 N1143886
Maximum sawing length: 12 meters
The various photos show:
- overall view of the saw
- saw machine plate
- saw with dust extraction pit
Gusdpfx Ahoyxhq Ujvsf
- automatic line behind the saw
- pit under the lower wheel
- feed line from the outside
- feed line as seen from the inside
- discharge line inside
- additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain
- collection bin behind the discharge line
- collection bin as seen from the other side. With a red button that can be operated from here and in the machine room
- discharge line in its entirety
- machine plate for the saw carriage
- saw carriage in the outside position, where the log can be placed
- control room behind the saw
- control room for electronic dimension setting and operation of all feed and discharge lines
- electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually
- Compressor: Atlas Copco GX 11 FF
- Type plate compressor, year of manufacture 2005
- Air dryer: Grass Air type DW 31
- Stellitem adjustment blocks for the guides through which the saw blades pass
Technical information:
- the machine must be operated with air, hydraulics, and electricity (and control current)
- the wheels (upper and lower) were ground approximately three years ago and can last for many more years
- control cabinet for the feed line was renewed in 2025
- at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment.
This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination.
The stated price is based on the Incoterm EXW, including disassembly by the buyer.
If you have any questions or would like more information, please feel free to send us a message or call us.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Year of manufacture: 1986
Vertical saw:
Type: Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type: Progress 750 Machine no.: 409621 S268 N1143886
Maximum sawing length: 12 meters
The various photos show:
- overall view of the saw
- saw machine plate
- saw with dust extraction pit
Gusdpfx Ahoyxhq Ujvsf
- automatic line behind the saw
- pit under the lower wheel
- feed line from the outside
- feed line as seen from the inside
- discharge line inside
- additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain
- collection bin behind the discharge line
- collection bin as seen from the other side. With a red button that can be operated from here and in the machine room
- discharge line in its entirety
- machine plate for the saw carriage
- saw carriage in the outside position, where the log can be placed
- control room behind the saw
- control room for electronic dimension setting and operation of all feed and discharge lines
- electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually
- Compressor: Atlas Copco GX 11 FF
- Type plate compressor, year of manufacture 2005
- Air dryer: Grass Air type DW 31
- Stellitem adjustment blocks for the guides through which the saw blades pass
Technical information:
- the machine must be operated with air, hydraulics, and electricity (and control current)
- the wheels (upper and lower) were ground approximately three years ago and can last for many more years
- control cabinet for the feed line was renewed in 2025
- at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment.
This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination.
The stated price is based on the Incoterm EXW, including disassembly by the buyer.
If you have any questions or would like more information, please feel free to send us a message or call us.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2026
۲ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+31 6 558... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Tatabánya
۳٬۴۱۰ km
Carl Zeiss Granit-MessplatteUSMC 24/15/12 Koordinatenmeßmaschine
آگهی کوچک
Iszkaszentgyörgy
۳٬۴۰۵ km
KnuthTurnado 230 x 1500
آگهی کوچک
Przemyśl
۳٬۱۹۶ km
TETRA PAK 1000 SLIM LINE CAP30 HELICAP23TBA21
آگهی کوچک
Schorfheide
۳٬۹۱۱ km
Sonstige/OtherFrumecar ECA 3000 mobile concrete plant
آگهی کوچک
Dugo Selo
۳٬۵۲۰ km
ElumatecSBZ 151
آگهی کوچک
Kehra
۳٬۶۵۷ km
WeinigEM814
آگهی کوچک
Nagykáta
۳٬۳۰۶ km
PollyPrestige 674+L
آگهی کوچک
Agios Athanasios
۲٬۷۸۱ km
SGPPEZZ 500/1700/1000
آگهی کوچک
Szczecin
۳٬۸۷۸ km
Dip-TechGlassJet AR6000
آگهی کوچک
Budapest
۳٬۳۴۱ km
Hilo
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است























































































































