Shrink Wrapper

Atlanta Combigiotto 90-M

 


Machine Overview


The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation.




Operating mode: Automatic


Infeed layout: Straight infeed (inline)


Packaging: Tray wrap with neutral film overwrap


Format range: 0.5 L – 10 L


Machine configuration: Delivered without container infeed system (to be provided by the line)


Year of manufacture: 2008; Overhauled: 2022




Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing.


Key Technical Data




Model: COMBIGIOTTO 90-M


Brand: ATLANTA


Operating condition: Ready for operation


Package configuration: Wrap + film on tray


Film type: Neutral


Tray: Available (tray packaging configuration)


Machine feed type: Straight (inline)


Format capability: 0.5 L to 10 L containers


Year: 2008 (overhauled 2022)




Automation & Control




Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability).


Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application.


Integrated diagnostics, alarm history and counters (shift/lot totals).


Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status.


Electrical protection degree: IP54 for the electrical system and motors.
Bwsdpsxdnbzofx Ah Sjh




Line Integration




Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator).


Inline design simplifies alignment with fillers, labellers and downstream conveying.


Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration.


Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering).




Condition & Maintenance




Overall status: Ready for operation.


Overhaul completed in 2022 to restore full functionality.