Heavy duty shelf4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
Heavy duty shelf
4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
VB به اضافه مالیات بر ارزش افزوده
€۱٬۴۹۰
سال ساخت
۲۰۲۴
وضعیت
ماشین نمایشگاهی
موقعیت
Bad Feilnbach 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Heavy duty shelf
- تولید کننده:
- 4 Stück Kragarmregal-Ständer einseitig
- سال ساخت:
- ۲۰۲۴
- وضعیت:
- تقریباً نو (دستگاه نمایشی)
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۱٬۴۹۰
- موقعیت:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland
تماس بگیرید
فروش ماشینآلات

آیا قبلاً دستگاه دست دوم خود را آگهی کردهاید؟
از طریق Machineseeker بدون کمیسیون بفروشید.
اطلاعات بیشتر درباره فروش ماشینآلات
اطلاعات بیشتر درباره فروش ماشینآلات
جزئیات پیشنهاد
- شناسه آگهی:
- A5776089
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۹.۱۱.۱۴۰۳
توضیحات
Cantilever rack in painted version (RAL 7016 anthracite):
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
Dsdpfx Afsguk A Honscn
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
Dsdpfx Afsguk A Honscn
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2019
ارسال درخواست
تلفن & فکس
+49 8064 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است