Eccentric pressZTS Kosice
LE-250-C

اطلاعات دستگاه
- نام دستگاه:
- Eccentric press
- تولید کننده:
- ZTS Kosice
- مدل:
- LE-250-C
- شماره دستگاه:
- 230958
- سال ساخت:
- ۱۹۸۸
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
جزئیات فنی
- تنظیم سیلندر هیدرولیک:
- ۱۱۰ میلیمتر
- عرض میز:
- ۱٬۱۲۰ میلیمتر
- طول میز:
- ۸۰۵ میلیمتر
- نیروی پرس:
- ۲۵۰ t
- طول کورس (ضربه):
- ۱۴۰ میلیمتر
ارائه
- موقعیت:
- Baden-Württemberg, آلمان
– فاصله: حدود ۴٬۰۹۰ کیلومتر
- در دسترس بودن:
- بلافاصله پس از پایان حراج
- شرایط تحویل:
- EXW
رایگان
توضیحات
General condition: Used, good, fully functional
Usage information: No dealers, machine ran on average less than 4 hours per day
Provision: the machine can also be dismantled and loaded - the additional costs are approx. 1,450 €
TECHNICAL DETAILS
Nominal forming force: 2,500 kN
clamping: 360 mm
Stroke (changeable within the range): 30 - 140 mm
Adjustability of the plunger downwards: 110 mm
max. stroke rate: 45 rpm
Usable stroke rate: 25 rpm
Working travel: 2.6 mm
clamping surfaces
Table clamping area: 1,120 x 805 mm
Table top thickness: 110 mm
Ram clamping surface: 800 x 475 mm
Opening in the table top: ø320 mm
Clamping opening in the ram: ø410 x 560/320 mm
Through-hole in the table: ø65H7 / 105 mm
flywheel and engine
Dimensions of the flywheel ring: ø1,300 x 280 mm
Flywheel revolutions: 228/min
Engine power: 22 kW
Electric motor revolutions: 1,450 rpm
MACHINE DETAILS
Working voltage: 3 x 380 V
Mains frequency: 50 Hz
Compressed air connection: 0.4 – 0.6 MPa
Air consumption per clutch engagement: 28 dm³
Machine dimensions (L x W x H): 2,660 x 1,350 x 2,975 mm
Machine weight: 12,800 kg
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
پرداختها
- هزینههای جانبی خرید:
- ۱۸ %
- شرایط پرداخت:
- ۱۰۰٪ پیشپرداخت
- روشهای پرداخت:
انتقال بانکی
جزئیات پیشنهاد
- شناسه آگهی:
- A17890711
- شماره مرجع:
- AUC-2411136
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۹.۱۰.۱۴۰۳
- پیشنهاد انحصاری:
- فقط در مزایده موجود است
بازدید
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.

































