Diesel ForkliftYale
GDP80VX9
Diesel Forklift
Yale
GDP80VX9
VB به اضافه مالیات بر ارزش افزوده
€۴۵٬۰۰۰
سال ساخت
۲۰۲۱
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Essen 

اطلاعات پایه
- نام دستگاه:
- Diesel Forklift
- تولید کننده:
- Yale
- مدل:
- GDP80VX9
- سال ساخت:
- ۲۰۲۱
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۸۶۲ h
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۴۵٬۰۰۰
- اجاره:
- امکانپذیر است
- محل فروشنده:
- Wilhelm-Beckmann-Straße 16, 45307 Essen, آلمان

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن خالی:
۱۲٬۴۱۷ کیلوگرم
طول کل:
۵٬۲۳۸ میلیمتر
ارتفاع بالابری:
۴٬۵۶۵ میلیمتر
برداشت آزاد:
۶۵ میلیمتر
ارتفاع سازه:
۳٬۴۶۵ میلیمتر
عرض ساخت:
۲٬۲۳۹ میلیمتر
موتور و گیربکس
نوع سوخت:
دیزل
ابزار جانبی
طول شاخکها:
۱٬۶۰۰ میلیمتر
عرض شاسی شاخک:
۲٬۰۱۵ میلیمتر
جزئیات بیشتر
قدرت:
۸۲ کیلووات (۱۱۱٫۴۹ اسب بخار)
نوع دکل:
دوپلکس
نوع سیستم انتقال قدرت:
Diesel
ظرفیت بار:
۸٬۰۰۰ کیلوگرم
جزئیات پیشنهاد
- شناسه آگهی:
- A23275402
- شماره مرجع:
- 13765
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۲.۰۸.۱۴۰۵
توضیحات
Diesel forklift
Load center: 900
Bjdpfxe Ahl Rme Abnedi
Fork width: 200 mm
Fork thickness: 70 mm
ISO class: ISO Class 4 = 5,000 - 10,000 kg
Mast type: Duplex
Transmission: Techtronix 332+ 3-speed transmission
Speed class: 25
Condition: Ready for use and fully functional
Technical condition: very good
Front tire type: Superelastic
Front tire condition: 40 - 60%
Rear tire type: Superelastic
Rear tire condition: 40 - 60%
Description: Machine completely workshop-tested, cleaned, and with new UVV and inspection certificates! Machine will be cleaned before delivery!
Turret, fork positioner,
Hydr. rotating FORK POSITIONER, Series S 11-ZV 80-360°-SO Load capacity 4,500 kg at 1,500 mm load center. Rotation range 360° in both directions, infinitely adjustable fork positioner range 560 - 1,600 mm measured from the outer edge, or 360 - 1,400 mm measured center-to-center. With center stop in front of the carriage rollers, widened slide guide, all hydraulic hoses with heat protection. In addition, the fork positioner has an oil motor protection. The lines of the oil motors are routed in pipes. The hoses are heat-resistant. The cylinder pressure is limited outwards and inwards so that the fork positioner cannot be used for clamping. Technical data: Weight: 2,300 kg ESP: 340 mm Overall dimension: 360 mm (to the rear edge of the carriage)
3rd valve, 4th valve, rear work light, front work light, full cabin, CE certificate, special design, interior mirror, LED,
- Drivetrain protection system with engine shutdown - Premium monitoring package - Speed limiter preset to 13 km/h (adjustable) - Mast inclination - 5° forward/6° backward - Accutouch mini-lever hydraulic controls - Automatic hydraulic control - Red seat belt with restraint system - 2 front and 1 rear LED work lights with brake, tail, turn, and reversing lights - Yellow rotating beacon - Activated via ignition switch - Pedestrian warning light (P.A.L) at the front and rear - LED lights mounted on the mast - Red Line (Side) Pedestrian Awareness Lights (Keyswitch Activated) - Key Activated (Automatic) Lights
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Load center: 900
Bjdpfxe Ahl Rme Abnedi
Fork width: 200 mm
Fork thickness: 70 mm
ISO class: ISO Class 4 = 5,000 - 10,000 kg
Mast type: Duplex
Transmission: Techtronix 332+ 3-speed transmission
Speed class: 25
Condition: Ready for use and fully functional
Technical condition: very good
Front tire type: Superelastic
Front tire condition: 40 - 60%
Rear tire type: Superelastic
Rear tire condition: 40 - 60%
Description: Machine completely workshop-tested, cleaned, and with new UVV and inspection certificates! Machine will be cleaned before delivery!
Turret, fork positioner,
Hydr. rotating FORK POSITIONER, Series S 11-ZV 80-360°-SO Load capacity 4,500 kg at 1,500 mm load center. Rotation range 360° in both directions, infinitely adjustable fork positioner range 560 - 1,600 mm measured from the outer edge, or 360 - 1,400 mm measured center-to-center. With center stop in front of the carriage rollers, widened slide guide, all hydraulic hoses with heat protection. In addition, the fork positioner has an oil motor protection. The lines of the oil motors are routed in pipes. The hoses are heat-resistant. The cylinder pressure is limited outwards and inwards so that the fork positioner cannot be used for clamping. Technical data: Weight: 2,300 kg ESP: 340 mm Overall dimension: 360 mm (to the rear edge of the carriage)
3rd valve, 4th valve, rear work light, front work light, full cabin, CE certificate, special design, interior mirror, LED,
- Drivetrain protection system with engine shutdown - Premium monitoring package - Speed limiter preset to 13 km/h (adjustable) - Mast inclination - 5° forward/6° backward - Accutouch mini-lever hydraulic controls - Automatic hydraulic control - Red seat belt with restraint system - 2 front and 1 rear LED work lights with brake, tail, turn, and reversing lights - Yellow rotating beacon - Activated via ignition switch - Pedestrian warning light (P.A.L) at the front and rear - LED lights mounted on the mast - Red Line (Side) Pedestrian Awareness Lights (Keyswitch Activated) - Key Activated (Automatic) Lights
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2024
۱۲۰ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 201 8... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Essen
۴٬۳۰۶ km
YaleGDP80VX9
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است

















