Machining center

Wood-Mizer CNC5003

Wood-Mizer CNC5003 CNC Machining Center – practically unused
Key data
• Category: CNC machining centers / CNC routers for wood (nesting)
• Year of manufacture: [2024]
• Condition: practically unused, demo / showroom unit
• Location: [KOŁO], Poland
• Availability: 2 units in identical specification — discount available if both are taken
• Sold directly by the manufacturer, no intermediaries
Description
An industrial-grade CNC machining center at a mid-range machine price.
Why this machine is worth considering
• Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder.
• FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator.
• Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration.
• 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning.
• 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials.
• The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation.
Technical data
Specification Value
Actual working area X / Y 3095 × 1535 mm (max. raster table area)
Z-axis travel 200 mm
Rapid traverse X / Y / Z 60 / 30 / 15 m/min
Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings
Tool changer ATC — 12-position carousel on the gantry, service access hatch
Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA
Control FANUC, ISO G/M code, PC and CAM interface, built-in server
Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve
Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar
Pneumatics FESTO
Nodpfx Anjyr Dawekjdb
Chip extraction articulated extraction hood
Control panel movable, on wheels — access from 3 sides of the table; local operation or via network
Frame size (footprint) 1570 × 4150 mm
Total length / width / height 4460 / 3000 / 2400 mm
Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum).
Terms of sale — stated openly
• Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price.
• Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators.
• Inspection and a test run on-site are welcome — bring your own material and file.
• Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID.
• We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.