Center latheWeiler
Praktikant 140B
Center lathe
Weiler
Praktikant 140B
VB به اضافه مالیات بر ارزش افزوده
€۲۱٬۵۰۰
سال ساخت
۱۹۸۸
وضعیت
کارکرده
موقعیت
Ubstadt-Weiher 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Center lathe
- تولید کننده:
- Weiler
- مدل:
- Praktikant 140B
- سال ساخت:
- ۱۹۸۸
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۲۱٬۵۰۰
- موقعیت:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A21302942
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۴.۱۲.۱۴۰۴
توضیحات
Weiler Praktikant 140 B Lead and Feed Screw Lathe – Toolmaker Precision with 3-Axis Digital Readout from K&C, NEW!
Technical Data:
- Year of manufacture: 1988, Machine No. 89-160-1292
- Centre height: 140 mm
- Centre distance: 650 mm
Nodpfjymdy Tex Ad Tecn
- Spindle speeds: from 24 to 2,500 rpm
- Spindle bore: 40 mm
- Short taper spindle nose DIN 55027 size 5 with bayonet lock
- Tailstock: Morse taper 3
- Feeds: from 0.02 to 0.63 mm/rev
- Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch
- Metric thread pitches: from 0.25 to 8 mm
- Weight: approx. 680 kg
- Engagable spindle brake
- Dimensions (LxHxD): 1.6 m x 1.25 m x 0.7 m
Included Equipment and Features:
- NEW K&C 3-axis digital readout, 12-month manufacturer's warranty, including operating manual
Features: Switching between mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick reset to zero, change of counting direction
- Collet chucking device with collets from 1 to 29 mm, in 0.5 mm increments
- 160 mm three-jaw chuck with 1 set of jaws
- Multifix quick-change tool post size A with 2 tool holders
- Bed stop
- Rear panel
- Machine feet
- Electronic spindle safety guard
- Operating manual
Safety Equipment: Electronic spindle guard, covered lead and feedscrew, 2 emergency stop buttons, spindle brake, electronic change gear door safety switch
About the Machine:
For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This excellent lathe comes from a training workshop. All of the slides move smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and enables surface finishes comparable to grinding. Take advantage of the opportunity to see and test the machine under power on site, and convince yourself of its condition.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Technical Data:
- Year of manufacture: 1988, Machine No. 89-160-1292
- Centre height: 140 mm
- Centre distance: 650 mm
Nodpfjymdy Tex Ad Tecn
- Spindle speeds: from 24 to 2,500 rpm
- Spindle bore: 40 mm
- Short taper spindle nose DIN 55027 size 5 with bayonet lock
- Tailstock: Morse taper 3
- Feeds: from 0.02 to 0.63 mm/rev
- Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch
- Metric thread pitches: from 0.25 to 8 mm
- Weight: approx. 680 kg
- Engagable spindle brake
- Dimensions (LxHxD): 1.6 m x 1.25 m x 0.7 m
Included Equipment and Features:
- NEW K&C 3-axis digital readout, 12-month manufacturer's warranty, including operating manual
Features: Switching between mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick reset to zero, change of counting direction
- Collet chucking device with collets from 1 to 29 mm, in 0.5 mm increments
- 160 mm three-jaw chuck with 1 set of jaws
- Multifix quick-change tool post size A with 2 tool holders
- Bed stop
- Rear panel
- Machine feet
- Electronic spindle safety guard
- Operating manual
Safety Equipment: Electronic spindle guard, covered lead and feedscrew, 2 emergency stop buttons, spindle brake, electronic change gear door safety switch
About the Machine:
For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This excellent lathe comes from a training workshop. All of the slides move smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and enables surface finishes comparable to grinding. Take advantage of the opportunity to see and test the machine under power on site, and convince yourself of its condition.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2007
ارسال درخواست
تلفن & فکس
+49 7251 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Ubstadt-Weiher
۴٬۱۵۲ km
WeilerPraktikant 140B
آگهی کوچک
Ubstadt-Weiher
۴٬۱۵۱ km
WEILERPraktikant VC - Teilüberholt
آگهی کوچک
Ubstadt-Weiher
۴٬۱۵۲ km
WeilerPraktikant 140B
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است







































