Fine/Cross Sanding Machine WEBER KSF-3-1350 (2010)

WEBER KSF-3-1350

- Perfect for surface finishing
- Constant working height
- Q/L/Q

Fine/cross-sanding machine
Manufacturer: Weber
Type: KSF-3-1350
Year of manufacture: 2010
Technical data
- Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding.
- With a constant working height

Machine frame
- Heavy-duty steel welded construction for mounting 3 sanding units
- Constant inlet height of 900 mm
- Control and sanding belt change side on the inlet side, on the left
- Stepless feed speed of 3-18 m/min, frequency-controlled.
- Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine

Unit 1: Cross-belt unit
- Pressure pad belt with felt and graphite for long service life
- ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width
- Workpiece-controlled sanding belt blowing device

Unit 2: CBF combination unit
- One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore
- One cross-running flap band with separate drive 4.0 kw
- ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating)
- Workpiece-controlled oscillating sanding belt blowing device

Unit 3: Cross-belt unit
Gbsdpfx Aiezuzctjvju
- ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width
- Workpiece-controlled sanding belt blowing device

Operator terminal SIEMENS" MP 377 12" Multi-Panel
- Graphical user guidance via 12" color display
- Program memory with 300 programs
- Setting of all parameters via program

WEBER i-Touch control
- One rotary knob for navigating through the most important functions

WEBER AWDM
- Automatic thickness adjustment at the machine inlet with start switch

Overthickness
- Selector switch at the machine inlet with the following functions:
- Automatic lifting of the contact roller and the segmented pressure bars
- Feed stop

ISA/ISD control
- High-resolution workpiece detection in a 22 mm grid
- Free loading of complex part shapes
- Multiple loading with a small lateral distance
- Sanding intensity individually adjustable at all edges
- Sanding pressure adjustable via program

ISA segmented pressure bar system (Unit 2)
- Pressure pad movable in the longitudinal and transverse direction

ISD segmented pressure bar system (Unit 1+3)
As ISA, but additionally with
- Separate adjustable pressure for the edge area (higher or lower)
- Optionally only on the outer edge or outer and inner edges
- Longitudinal and transverse edges or only longitudinal edges can be adjusted

Workpiece blowing device - with WEBER ES system
- Energy-saving, workpiece-controlled workpiece cleaning with single slider control

WANDRES-Micro-Cleaning (single brush version)
- Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal)

Technical data
- Working width: 1350 mm
- Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW
- Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW
- Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW
- Drive CBF: 3.0 kW
- Drive vacuum blower: 5.5 kW
- Drive feed (frequency-controlled): 3.0 kW
- Drive height adjustment (frequency-controlled): 0.75 kW
- Sanding belt speed (frequency-controlled): approx. 3-20 m/s
- Sanding belt dimensions cross belts (W x L): 2x150x5100 mm
- Sanding belt dimensions wide belt (W x L): 1370x2620 mm
- Workpiece thickness (min./max.): 4-140 mm
- Working height (constant): 900 mm
- S

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.