کامیون مسطح

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Chassis - New Vehicle: - MODEL 2024

? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided.
? Please refer to the attached documents for detailed vehicle specifications.
? Oil pump type: LEDUC
? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe
? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet)

Body:
Crane interchangeable system:
The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis.
The function of the crane and body including the fifth wheel plate is also possible.
The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally.
A crawler track would also be available, net price is €149,900.

? Assembly/bolting of the crane and main support beam to the subframe.
Installation of all hydraulic and electrical connections. Mounting location: Front
? Flatbed body as a steel/welded construction, removable
? Length approx. 380 cm, width approx. 248 cm.
? Flatbed body painted. Color: RAL (chassis color)
? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets.
? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color)
? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement.
? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body)
? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on.
? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted)
Ndodpey Hm Eyjfx Abmea
? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm.
? Brackets (for support plates, crane plates) made of galvanized steel.
? Additional support mounted under the chassis.
? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections.
? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers.

? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions.
? Please refer to the attached documents for detailed crane specifications.
? Series 5450
? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes.

Additional equipment and crane accessories:
? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing.
? AWC (automatic rope length control)
? Operating manual, maintenance manual and crane inspection book.
Lighting:
? 2 x LED AS integrated in the front wall
? 2 x rotating beacons on the FH roof
? 2 x FLASH lights in the bonnet
? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed.
? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted.
? 4 x yellow LED light strips, 1x mounted on each support.

Further information is available upon request.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.