Container filling system filling machineVolumenfüller Fillingmaschine Fillig
Hema
Container filling system filling machine
Volumenfüller Fillingmaschine Fillig
Hema
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۳٬۳۰۰
وضعیت
کارکرده
موقعیت
Weinburg am Saßbach 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Container filling system filling machine
- تولید کننده:
- Volumenfüller Fillingmaschine Fillig
- مدل:
- Hema
- وضعیت:
- کاملاً بازسازیشده (کارکرده)
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۳٬۳۰۰
- موقعیت:
- 8481 Weinburg am Saßbach, Österreich
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A18464816
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۰.۰۴.۱۴۰۴
توضیحات
Vacuum filler, piston filler, volume filler
Here we have a machine that used to be used to fill mushrooms (fruit and vegetables) into cans.
Gujdpfsvxubusx Acyeh
In the following formats: 850ml Ø99, 425ml 315ml and 212ml Ø73
The performance always depends on the product and filling quantity.
The product was fed into the funnel at the top.
In this case, the product was rinsed downwards with water.
The product is pressed into the filling shaft or sucked in with a vacuum.
The water is sucked out with the vacuum pump so that only the product could be filled in the next step.
The cans are placed under the shaft and the product falls freely into the can.
It is also possible to press the product downwards using compressed air (blow) in order to achieve complete emptying of sticky products.
Are you looking for other filling machines, sealers, transport or packaging machines for your production?
Contact us.
We have only advertised a small part here on the internet.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Here we have a machine that used to be used to fill mushrooms (fruit and vegetables) into cans.
Gujdpfsvxubusx Acyeh
In the following formats: 850ml Ø99, 425ml 315ml and 212ml Ø73
The performance always depends on the product and filling quantity.
The product was fed into the funnel at the top.
In this case, the product was rinsed downwards with water.
The product is pressed into the filling shaft or sucked in with a vacuum.
The water is sucked out with the vacuum pump so that only the product could be filled in the next step.
The cans are placed under the shaft and the product falls freely into the can.
It is also possible to press the product downwards using compressed air (blow) in order to achieve complete emptying of sticky products.
Are you looking for other filling machines, sealers, transport or packaging machines for your production?
Contact us.
We have only advertised a small part here on the internet.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ارسال درخواست
تلفن & فکس
+49 9621 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است