Punching machine

TRUMPF 3000-1300 (S11) średni format 1250/2500

Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500
We are the first and only owner of the machine.
Machine with complete history and service documentation.
Machine is in fully working order and in continuous operation.

Technical data:
Width 6500 mm
Depth 6203 mm
Height 2252 mm
Max. punching sequence (E = 1 mm) 1000 1/min
Max. punching sequence – marking 2500 1/min
Punching mode, X-axis 2500 mm
Punching mode, Y-axis 1250 mm
Max. sheet thickness 6.4 mm
Max. workpiece weight 160 kg
Max. punching force 180 kN
Multitool tool change time 0.3 sec
Number of tools/sheet clamps | 18 pcs / 2 pcs
Max. part size, part flap when punching 500 mm x 500 mm
Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm
Average power consumption with active automatic shutdown 0.3 kW
Average power consumption during production 5.6 kW

Additional, non-standard machine equipment:

1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control.
2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed.
3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal.
4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology.
An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended.
5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies.
6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option).
7) Second locating pin: the pin is located on the outside on the right side.
8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling.
9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process.
Ppjdpfszd U D Nex Ak Tou

We invite you to contact us.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.