Bed milling machine

TOS KUŘIM FS 100 OM A4 CNC

The machine is currently disassembled and is undergoing refurbishment with the following scope of work:

- Complete disassembly and cleaning
- Inspection of all components
- New Tribotec lubrication unit
- Overhaul of the dedicated console balancing circuit
- Milling head “O” – complete overhaul including replacement of gears
- Replacement of the gearbox bearings
- Replacement of belts
- Repair of ball screws and their bearings
- Resealing of the machine’s hydraulic circuits and replacement of solenoid valves
- Addition of automatic gear lubrication in the milling head
- Resealing of all hydraulic cylinders and modernization of seals
- Overhaul of the hydraulic power unit
- Overhaul of Indramat feed motors and the spindle motor
- Repair and adjustment of Indramat drives
- Overhaul of the electrical cabinet including control elements
- Replacement and modernization of limit switches throughout the machine
- Repair or replacement of Heidenhain system cables and TNC 426
- Overhaul of the control panel
- Overhaul of the Heidenhain TNC 426 control system, including keyboard and display unit
- The machine will be fully functional and delivered with geometric accuracy documented by protocol
- New machine paint in RAL 5005 and RAL 9010 color scheme.

Technical Data

Maximum spindle torque: 1,200 Nm
Maximum feed force in X, Y, Z axes: 20,000 N
Maximum workpiece weight: 9,000 kg
Total table area: 1,000 x 4,000 mm
Number of T-slots/table pitch: 7/140 mm
Slot width: 24H7 mm
Table height from base: 900 mm
Longitudinal travel (X): 4,000 mm
Cross travel (Y): 1,000 mm
Vertical travel (Z): 900 mm
Minimum distance from horizontal spindle axis to table clamping surface: 150 mm
Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm
Minimum distance from vertical spindle nose to table clamping surface: 130 mm
Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm
Distance from horizontal spindle nose to inner table edge: 80 mm
Distance from vertical spindle axis to inner table edge: 100 mm
Spindle taper: ISO 50
Cpjdpsxnkkaefx Af Djw
Retraction force of clamping mechanism: 16,100 N
Horizontal spindle swiveling – bilateral: 180°
Vertical spindle swiveling – bilateral: 180°
Spindle head positioning: adjustable in 2.5° increments
Usable power of main drive motor: 22 kW
Spindle speed range: 11 to 2,500 rpm
Number of spindle speed steps: stepless
Feed rate range: 1 to 5,000 mm/min
Rapid traverse in Y, Z axes: 10 m/min
Rapid traverse in X axis: 10 m/min

Machine available for delivery at the end of 2025.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.