Wood shredderSchliesing
235 MX-D
Wood shredder
Schliesing
235 MX-D
سال ساخت
۲۰۲۲
وضعیت
ماشین نمایشگاهی
موقعیت
Bad Lippspringe 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Wood shredder
- تولید کننده:
- Schliesing
- مدل:
- 235 MX-D
- شماره دستگاه:
- 227057
- سال ساخت:
- ۲۰۲۲
- وضعیت:
- تقریباً نو (دستگاه نمایشی)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۲۶ h
قیمت و مکان
- موقعیت:
- Schulze-Delitzsch-Weg 4, 33175 Bad Lippspringe, Deutschland
- اجاره:
- امکانپذیر است
تماس بگیرید
جزئیات فنی
- قدرت:
- ۱۸٫۵ کیلووات (۲۵٫۱۵ اسب بخار)
- نوع سوخت:
- دیزل
- رنگ:
- زرد
جزئیات پیشنهاد
- شناسه آگهی:
- A18175916
- شماره مرجع:
- M1182
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۴.۰۱.۱۴۰۴
توضیحات
Technical data:
Type: 235 MX
Logs: Up to 19 cm in diameter
Operating hours: Approx. 15
Year of manufacture: 2022
M 1182
Fixed chipper housing
Intake width: 240 mm
Basic weight: approx. 1,370 kg
Equipped with normal cut and power control system
Engine power: 18.5 kW (25.2 HP), EU-V
4-cylinder Kubota Stage V diesel engine
Hfodpfx Aovmz Spscysn
Fully galvanized single-axle chassis (80 km/h)
Towing device with overrun brake, support wheel at the front, parking support at the rear
Lighting in accordance with StVZO (impact-protected)
Features:
Logs up to Ø 19 cm: The 235 MX-D is a powerful bush wood chipper that eats through logs with a diameter of up to 19 cm.
Intake width 24 cm: With an intake width of 24 cm, the chipper enables efficient chipping of wood.
Robust construction: The chipper is robustly built and offers a long service life even under demanding conditions in gardening and landscaping.
Engine and chassis:
Water-cooled Stage V 4-cylinder Kubota diesel engine: With 18.5 kW (25.2 HP), the engine offers the necessary power for efficient work.
Industrial freewheel clutch: Automatically acts between the engine and chipping disc to protect the engine, bearings and shaft.
Fully galvanized, corrosion-resistant single-axle chassis: For a speed of up to 80 km/h with EU homologation.
Housing/hopper/blow-out pipe:
Foldable intake hopper: With a minimum input depth of 1,500 mm for easy handling.
Fully galvanized, corrosion-resistant hopper flap: For a long service life and reliable operation.
Chipping mechanism:
Chipping disc Ø 655 mm, 35 mm thick: With a closed knife system for quick, safe and precise knife changes.
Continuously adjustable chipping knives: For individual adaptation to requirements.
Hydraulic feed:
Feed control with its own hydraulic circuit: For precise control of the feed.
PowerGrip feed roller: With hydraulic feed for a grippy, aggressive and even feed.
Safety:
Complies with the safety regulations of DIN-EN 13525: For safe operation and compliance with the relevant standards.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Type: 235 MX
Logs: Up to 19 cm in diameter
Operating hours: Approx. 15
Year of manufacture: 2022
M 1182
Fixed chipper housing
Intake width: 240 mm
Basic weight: approx. 1,370 kg
Equipped with normal cut and power control system
Engine power: 18.5 kW (25.2 HP), EU-V
4-cylinder Kubota Stage V diesel engine
Hfodpfx Aovmz Spscysn
Fully galvanized single-axle chassis (80 km/h)
Towing device with overrun brake, support wheel at the front, parking support at the rear
Lighting in accordance with StVZO (impact-protected)
Features:
Logs up to Ø 19 cm: The 235 MX-D is a powerful bush wood chipper that eats through logs with a diameter of up to 19 cm.
Intake width 24 cm: With an intake width of 24 cm, the chipper enables efficient chipping of wood.
Robust construction: The chipper is robustly built and offers a long service life even under demanding conditions in gardening and landscaping.
Engine and chassis:
Water-cooled Stage V 4-cylinder Kubota diesel engine: With 18.5 kW (25.2 HP), the engine offers the necessary power for efficient work.
Industrial freewheel clutch: Automatically acts between the engine and chipping disc to protect the engine, bearings and shaft.
Fully galvanized, corrosion-resistant single-axle chassis: For a speed of up to 80 km/h with EU homologation.
Housing/hopper/blow-out pipe:
Foldable intake hopper: With a minimum input depth of 1,500 mm for easy handling.
Fully galvanized, corrosion-resistant hopper flap: For a long service life and reliable operation.
Chipping mechanism:
Chipping disc Ø 655 mm, 35 mm thick: With a closed knife system for quick, safe and precise knife changes.
Continuously adjustable chipping knives: For individual adaptation to requirements.
Hydraulic feed:
Feed control with its own hydraulic circuit: For precise control of the feed.
PowerGrip feed roller: With hydraulic feed for a grippy, aggressive and even feed.
Safety:
Complies with the safety regulations of DIN-EN 13525: For safe operation and compliance with the relevant standards.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2023
ارسال درخواست
تلفن & فکس
+49 5254 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است