Panel saw

Schelling FH4

Electrical connected load: approx. 25 kW
Voltage and frequency: 400 V / 50 Hz
Mains system: TN with earthed neutral point
Operating pressure: 6 bar overpressure
Compressed air volume at operating pressure: approx. 143 l/min
Compressed air volume at standard pressure (1 bar): approx. 1000 l/min
Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm
Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm
Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm
Required extraction velocity: 25 m/s
Extraction capacity: 3190 m³/h
Required negative pressure at extraction ports: 2500 Pascal
Fedpfxsytfxwe Abropd

Nominal cutting length for saw machine 580: 5800 mm
Maximum saw blade diameter (S): 350 mm
Scoring saw blade diameter (V): 300 mm
Saw blade projection above table (U): max. 95 mm
Maximum clamp opening (K): 90 mm
Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm
Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm
Minimum alignment force of strip aligner: 400 N / unit
Maximum alignment force of strip aligner: 2000 N / unit
Working height, longitudinal saw: 970 mm
Overall height: 2070 mm

Main saw motor power: 15 kW
Saw unit feed speed, forward: 5 to 120 m/min
Saw unit feed speed, return: 120 m/min
Return feed speed – longitudinal saw: up to 80 m/min

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.