Precision turning lathe

Schaublin 150

For sale is a Schaublin 150 precision lathe from Switzerland. It is considered one of the best conventional lathes ever built. The machine has been overhauled. The spindle has been fitted with new bearings. The bearing set was ordered directly from Schaublin. The slides have been scraped.
Turning tests with 30mm round steel resulted in a cylindricity of 0.002mm over 200mm.

A large amount of accessories is included with the machine:
- Reishauer 3-jaw chuck, 2x
- Original Multifix B Mivesa tool holder
- Collet chuck with lever clamp
- Schaublin B32 collet set, 2 to 28mm, complete in 0.5mm increments, with MK5/B32 reducing sleeve and draw tube.
- Steady rests
- Machine documentation with catalog
- Complete standard set of change gears, plus special gears
- Conventional tool holder from Schaublin
- Fixed and live center
- Albrecht drill chuck
- Coolant system
- Digital readout

The machine has not been used extensively in recent years and was only used sporadically.

Extremely robust construction, suitable for hard turning.
Center height: 150mm
Distance between centers: 630mm
Spindle bore: Ø40mm
Spindle speed, continuously variable: 55-3,000 rpm
Feed rate: 0.05-0.35 mm/rev
Spindle taper: MK5
Tailstock taper: MK3
Rodpfoy Uqx Hox Aqpocb
Swinging diameter over cross slide: Ø177mm
Swinging diameter over bed: Ø340mm
Motor: 4.5kW
Dimensions: 1,730x970x1,300mm
Weight: 1250kg

The machine can be inspected and tested under power by arrangement in 5023 Salzburg.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.