2016 SAMO OCEMI Stainless Slitter 1500x3

SAMO OCEMI Stainless Slitter 1500x3

Stainless Slitter 1500x3, made SAMO OCEMI

Completely revamped in the year 2016.

Technical specifications

Thickness minimum: 0,4mm

Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2

Coil width: max 1.540 mm.

Max coil weight: 16 t

Direction: left to right
Kledsymcmfjpfx Advor

Speed: up to 150 m/min.

Scope of supply

· Coil car, hydraulic, Over floor

· Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake.

Motorized snubber roll.

Paper rewinder.

Alignment.

· Coil opener with telescopic table.

· Feeding unit with pinch-roll and 3-rolls straightener.

· Centering unit (motorized) with 3 flattening rolls (poliurethane).

· PVC film applicator (new 2017)

· Slitting head, shaft diam.: 200 mm.

DC motor 72 kW 780-2.652 rpm + stationary brake.

· Turnstile knife charger – 2 arms couples.

· Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake.

Scrap table, movable, with scrap conveyor.

· Scrap rewinder, single drum dimension 600x600.

Ac motor 15 kW with inverter.

· Bypass table (loop)

· Braking car (movable) with:

- double separating roll
- Deburring pinch-roll (new in 2017)
- Felt press
- Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery.
- Cross cutting shear (crop shear)
- Deflector roll

- Recoiler, hydraulic expansion, separating arm with automatic lifting system.

DC motor 114 kW 800-2.400 rpm + stationary brake.

· Discharging coil car, over floor, with press arm.

· Turnstile arm 4 x 20 t, motorized

· Electric EQUIPMENT (NEW in year 2016).

Supply voltage 3x380V

Consisting of:

Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300.

N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch

· Hydraulic equipment.

Hydraulic power pack with oil-air cooling.

Manifolds with electric valves on each machine, 24 V DC

· Complete safety fences, mechanical/optical.

· Cutting tools (knifes approx. 160 pieces, spacers, separating discs..).

Documentation

Foundation drawings

Electric drawings.

Hydraulic plan.

PLC and HMI Software.

CE declaration of Conformity
Thickness minimum: 0,4 mm
Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2
Coil width: max 1.540 mm
Max coil weight: 16 t
Speed: up to 150 m/min
Direction: left to right