SAHINLER hydraulic steel workerSahinler
HKM 40
SAHINLER hydraulic steel worker
Sahinler
HKM 40
EXW قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۴٬۵۰۰
سال ساخت
۲۰۱۲
وضعیت
کارکرده
موقعیت
Spittal an der Drau 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- SAHINLER hydraulic steel worker
- تولید کننده:
- Sahinler
- مدل:
- HKM 40
- سال ساخت:
- ۲۰۱۲
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
EXW قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۴٬۵۰۰
- موقعیت:
- Bünkerstrasse 44, 9800 Spittal an der Drau, Österreich

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A20479155
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۶.۰۸.۱۴۰۴
توضیحات
in the following configuration:
- GEKA punch holder No. 8-31 and 8-40 with quick-change system
- GEKA die holder No. 8 and No. 5
- Support table at the punching station with stops
- Support table at the flat bar station with stops
- Selector switch for setup and operating modes
- 1 foot pedal
- Incl. accessories (punches and dies)
- Technical documentation
- CE design
Technical data:
Punching unit:
Punching force: 40 t
Throat depth: 175 mm
Stroke: 50 mm
Strokes per min. (at 20 mm stroke): 20 pcs.
Max. sheet thickness Ø: 20 x 15 mm
Working height: 970 mm
Flat bar shear:
Cutting capacity: 300 x 6 / 200 x 13 mm
Angle steel 45° (one flange): 50 x 50 x 6 mm
Angle steel 90°: 80 x 80 x 8 mm
Blade length: 356 mm
Working height: 980 mm
Round and angle steel shear:
Angle steel 90°: 80 x 80 x 8 mm
Round: 30 mm
Square: 25 mm
Working height: 1,110 mm
General:
Motor power: 3 kW
Voltage: 400 V / 50 Hz
Dimensions:
Width: 800 mm
Depth: 1,100 mm
Csdpfx Ajxu Ugxeg Iohf
Height: 1,520 mm
Weight approx.: 580 kg
The specified performances refer to steel with R = 45 kg/mm²
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
- GEKA punch holder No. 8-31 and 8-40 with quick-change system
- GEKA die holder No. 8 and No. 5
- Support table at the punching station with stops
- Support table at the flat bar station with stops
- Selector switch for setup and operating modes
- 1 foot pedal
- Incl. accessories (punches and dies)
- Technical documentation
- CE design
Technical data:
Punching unit:
Punching force: 40 t
Throat depth: 175 mm
Stroke: 50 mm
Strokes per min. (at 20 mm stroke): 20 pcs.
Max. sheet thickness Ø: 20 x 15 mm
Working height: 970 mm
Flat bar shear:
Cutting capacity: 300 x 6 / 200 x 13 mm
Angle steel 45° (one flange): 50 x 50 x 6 mm
Angle steel 90°: 80 x 80 x 8 mm
Blade length: 356 mm
Working height: 980 mm
Round and angle steel shear:
Angle steel 90°: 80 x 80 x 8 mm
Round: 30 mm
Square: 25 mm
Working height: 1,110 mm
General:
Motor power: 3 kW
Voltage: 400 V / 50 Hz
Dimensions:
Width: 800 mm
Depth: 1,100 mm
Csdpfx Ajxu Ugxeg Iohf
Height: 1,520 mm
Weight approx.: 580 kg
The specified performances refer to steel with R = 45 kg/mm²
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2021
ارسال درخواست
تلفن & فکس
+43 4762 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است








