SAACKE UW I DSAACKE
UW I D
SAACKE UW I D
SAACKE
UW I D
سال ساخت
۲۰۰۷
وضعیت
کارکرده
موقعیت
ایتالیا 

اطلاعات پایه
- نام دستگاه:
- SAACKE UW I D
- تولید کننده:
- SAACKE
- مدل:
- UW I D
- سال ساخت:
- ۲۰۰۷
- وضعیت:
- آماده به کار (دست دوم)
قیمت و مکان
- موقعیت:
- , ایتالیا

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن کل:
۵٬۲۰۰ کیلوگرم
اسپیندلها
حداکثر سرعت اسپیندل:
۱۰٬۰۰۰ دور/دقیقه
مشخصات محور
مسافت جابجایی محور X:
۶۲۵ میلیمتر
مسافت حرکت محور Y:
۳۰۵ میلیمتر
مسافت حرکت محور Z:
۳۰۵ میلیمتر
جزئیات بیشتر
تعداد محور:
۵
جزئیات پیشنهاد
- شناسه آگهی:
- A23358440
- شماره مرجع:
- IT-GRI-SAA-2007-00001
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۸.۰۸.۱۴۰۵
توضیحات
This SAACKE UW I D was manufactured in 2007. This cylindrical grinding machine accommodates tools up to 250 mm in diameter and 480 mm in length between centers. It has a 625 mm longitudinal travel, 305 mm transverse and vertical travel, and a grinding spindle with adjustable speeds from 2,000 to 10,000 rpm. The grinding wheel changer has four magazine slots. Consider the opportunity to buy this SAACKE UW I D cylindrical grinding machine. Contact us for further details.
• Max. workpiece diameter: 250 mm
• Max. diameter for complete machining: 250 mm
• Max. length for complete machining (from front edge of workpiece carrier): 430 mm
• Max. tool length between centers: 480 mm
• Center height: not specified
• Axes and travels
• X-axis (longitudinal): travel 625 mm; feed rate 0–15 m/min; usable table surface 900 x 185 mm
• Z-axis (cross-slide): transverse travel 305 mm; feed rate 0–15 m/min
• Y-axis (vertical slide): vertical travel 305 mm; feed rate 0–15 m/min
• B-axis (grinding head): swivel in horizontal plane 240°; twisting speed 120°/s
• A-axis (workpiece carrier, direct-drive hollow-shaft motor)
• Mounting: ISO 50
• Mounting sleeve bore: Ø 28 mm (Ø 20 mm with automatic clamping)
• Indexing options: 1–999
• Indexing accuracy: ±15"
• Cumulative indexing error (at Ø 100 mm): 8 μm
Kjdpfx Ao Ak I Ukjkijnd
• Max. rotational speed: 600 1/min
• Guides and drives
• Linear axes driven by high-precision ball screws with two preloaded nuts
• Axes guided on hardened rails with recirculating roller bearings
• Grinding head and spindle
• Liquid-cooled motorized spindle 150 x 150 mm
• Grinding wheel mount: HSK-C/E 50 quick-clamping
• Spindle speed: 2,000–10,000 1/min (optional 20,000 1/min; optional with vector control)
• Max. grinding wheel diameter: Ø 150 mm
• Grinding wheel changer
• Direct-drive rotary magazine
• Number of magazine slots: 4 (optional 8)
• Automatic magazine management via software
• Power ratings (nominal)
• Grinding spindle peak power: 26 kW
• Grinding spindle at S6-60%: 16 kW
• Longitudinal travel (X): 3 kW
• Workpiece carrier (A): 3 kW
• Cross slide (Z): 3 kW
• Grinding head slide (Y): 3 kW
• Grinding head rotation (B): 3 kW
• Measuring systems and resolution
• Position measuring: A, X, Y, Z direct; B indirect
• Resolution: X/Y/Z 0.0001 mm (0.1 μm); A/B 0.0001°
• Control system
• NUM Axium Power 1050 CNC with PC
• Program memory: 512 k (optional 1024 k)
• Utilities and installation
• Electrical connection: connected load 27 kW; back-up fuse 63 A
• Operating voltage: 400 V ±10%, 50 Hz; control voltage 24 V; lighting voltage 230 V
• Compressed air: 15–17 Nm³/h; pressure 6–8 bar (600–800 kPa); quality at least Class 4 (ISO 8573-1)
Additional equipment
• Workpiece changer (Option: Pick-up version)
• Max. workpiece: Ø 32 mm; length 250 mm; weight 2.5 kg
• Pallet capacity by shaft diameter:
• 3.0–5.0 mm: 180 pcs
• 5.1–9.0 mm: 121 pcs
• 9.1–12.0 mm: 90 pcs
• 12.1–16.0 mm: 70 pcs
• 16.1–20.0 mm: 35 pcs
• 20.1–27.0 mm: 24 pcs
• 27.1–32.0 mm: 18 pcs
• Pallet changer (Option)
• Capacity: 6 pallets
• Max. workpiece diameter: 250 mm
• Max. diameter for complete machining: 250 mm
• Max. length for complete machining (from front edge of workpiece carrier): 430 mm
• Max. tool length between centers: 480 mm
• Center height: not specified
• Axes and travels
• X-axis (longitudinal): travel 625 mm; feed rate 0–15 m/min; usable table surface 900 x 185 mm
• Z-axis (cross-slide): transverse travel 305 mm; feed rate 0–15 m/min
• Y-axis (vertical slide): vertical travel 305 mm; feed rate 0–15 m/min
• B-axis (grinding head): swivel in horizontal plane 240°; twisting speed 120°/s
• A-axis (workpiece carrier, direct-drive hollow-shaft motor)
• Mounting: ISO 50
• Mounting sleeve bore: Ø 28 mm (Ø 20 mm with automatic clamping)
• Indexing options: 1–999
• Indexing accuracy: ±15"
• Cumulative indexing error (at Ø 100 mm): 8 μm
Kjdpfx Ao Ak I Ukjkijnd
• Max. rotational speed: 600 1/min
• Guides and drives
• Linear axes driven by high-precision ball screws with two preloaded nuts
• Axes guided on hardened rails with recirculating roller bearings
• Grinding head and spindle
• Liquid-cooled motorized spindle 150 x 150 mm
• Grinding wheel mount: HSK-C/E 50 quick-clamping
• Spindle speed: 2,000–10,000 1/min (optional 20,000 1/min; optional with vector control)
• Max. grinding wheel diameter: Ø 150 mm
• Grinding wheel changer
• Direct-drive rotary magazine
• Number of magazine slots: 4 (optional 8)
• Automatic magazine management via software
• Power ratings (nominal)
• Grinding spindle peak power: 26 kW
• Grinding spindle at S6-60%: 16 kW
• Longitudinal travel (X): 3 kW
• Workpiece carrier (A): 3 kW
• Cross slide (Z): 3 kW
• Grinding head slide (Y): 3 kW
• Grinding head rotation (B): 3 kW
• Measuring systems and resolution
• Position measuring: A, X, Y, Z direct; B indirect
• Resolution: X/Y/Z 0.0001 mm (0.1 μm); A/B 0.0001°
• Control system
• NUM Axium Power 1050 CNC with PC
• Program memory: 512 k (optional 1024 k)
• Utilities and installation
• Electrical connection: connected load 27 kW; back-up fuse 63 A
• Operating voltage: 400 V ±10%, 50 Hz; control voltage 24 V; lighting voltage 230 V
• Compressed air: 15–17 Nm³/h; pressure 6–8 bar (600–800 kPa); quality at least Class 4 (ISO 8573-1)
Additional equipment
• Workpiece changer (Option: Pick-up version)
• Max. workpiece: Ø 32 mm; length 250 mm; weight 2.5 kg
• Pallet capacity by shaft diameter:
• 3.0–5.0 mm: 180 pcs
• 5.1–9.0 mm: 121 pcs
• 9.1–12.0 mm: 90 pcs
• 12.1–16.0 mm: 70 pcs
• 16.1–20.0 mm: 35 pcs
• 20.1–27.0 mm: 24 pcs
• 27.1–32.0 mm: 18 pcs
• Pallet changer (Option)
• Capacity: 6 pallets
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Auenwald
۴٬۰۸۲ km
ZEISSPrismo 7 - 9.12.7
موفق
پیام شما ارسال شد.
آگهی کوچک
آلمان
۴٬۰۶۹ km
StrausakU-Grind
موفق
پیام شما ارسال شد.
آگهی کوچک
Lontzen
۴٬۳۶۴ km
TosBUB E 50/2000
موفق
پیام شما ارسال شد.
آگهی کوچک
Cloppenburg
۴٬۲۷۳ km
ReineckerWZS 60
موفق
پیام شما ارسال شد.
آگهی کوچک
Kirchheim unter Teck
۴٬۰۸۱ km
KELLENBERGERKEL-VITA mit Lader
موفق
پیام شما ارسال شد.
آگهی کوچک
Bienne
۴٬۲۲۰ km
AGATHON175-A
موفق
پیام شما ارسال شد.
آگهی کوچک
Trenčianske Stankovce
۳٬۴۷۹ km
FanucFANUC ROBOSHOT Alpha S100iA
موفق
پیام شما ارسال شد.
آگهی کوچک
Kirchheim unter Teck
۴٬۰۸۴ km
JUNG HF50Nachrüstung Digitalanzeige
موفق
پیام شما ارسال شد.
آگهی کوچک
Bienne
۴٬۲۲۰ km
FANUCROBODRILL α-D21MIA5
موفق
پیام شما ارسال شد.
آگهی کوچک
Sremska Mitrovica
۳٬۲۴۳ km
BRUDERERBSTA 80
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است


















































































