Fanuc Roboshot S100iA (2019) only 400 hours! electric machine, new machine

Fanuc FANUC ROBOSHOT Alpha S100iA

Clamping force: 100 t

Screw diameter: 32 mm

Shot volume: 103 cm3

Type: Horizontal

Drive: Electric




FANUC Roboshot α-S100iA :

Basic Technical Specifications



Mechanism: Double toggle

Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_

Die height double platen: 150–450 mm _(opt. 150–550 mm)_

Die height single platen: 220–520 mm _(opt. 220–620 mm)_

Clamping stroke: 350 mm

Locating ring: Ø 125 mm

Tie bar spacing (H×V): 460 × 410 mm

Platen size (H×V): 660 × 610 mm

Min. mould size (H×V): 265 × 240 mm

Ejector stroke: 100 mm

Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_





1. Clamping force: 1000 kN
2. Injection speed: 200 mm/s
3. Max. injection pressure: 2200 bar
4. Min./Max. mold height: 150 mm / 620 mm (extended)
5. Clamping stroke: 350 mm
6. Tie bar spacing: 460 × 410 mm
7. Ejector stroke: 100 mm
8. Screw diameter: 32 mm (103 cm³)
9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF)
10. Nozzle: Standard open R19D4

Control & Software (FANUC 31i-B CNC)

1. 15" LCD touchscreen
2. SI unit (kN, MPa...)
3. Password-protected screen lock
4. AI pressure profile trace function
5. AI metering control function
6. AI mold protection function
7. AI ejector protection function
8. Backflow monitor function
9. Precise metering 2, 3
10. Auto purge function
11. Extruder delay timer function
12. High precision V-P switch function
13. Injection unit temperature control and display
14. Automatic mold height adjustment
15. 2-stage ejection
16. Ejector delay function
17. Pre-ejection function
18. Optimal energy consumption function

Standard Machine Equipment

1. Extended mold height
2. 4-circuit rotameter
3. Automatic mold height adjustment
4. Hopper slider
5. 3-color LED signal lamp
6. Automatic purge and material cleaning function
7. Plasticizing speed control
8. Decompression control additional function
9. Backflow monitoring function
10. AI mold and ejector protection
11. Mold protection output on moving platen
12. Energy consumption measurement function
13. Robot interface (Euromap 67)
14. Auto stop/shutdown mode
15. 3 independent air valves
16. 8 digital outputs, 11 digital inputs
17. Pre-injection / injection compression function
18. Cascade injection valve control (up to 8 valves)
19. USB and memory card output
Hodezktkzepfx Aqpju
20. Tool kit (standard tools + grease gun)