Portal milling machine for plastics and woodRoboteus
RBF2030V
Portal milling machine for plastics and wood
Roboteus
RBF2030V
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۸٬۹۰۰
سال ساخت
۲۰۲۶
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Bonn 

اطلاعات پایه
- نام دستگاه:
- Portal milling machine for plastics and wood
- تولید کننده:
- Roboteus
- مدل:
- RBF2030V
- سال ساخت:
- ۲۰۲۶
- وضعیت:
- تقریباً نو (استفادهشده)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۵ h
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۸٬۹۰۰
- موقعیت:
- Bonn, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A23333621
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۲.۰۸.۱۴۰۵
توضیحات
Like-new CNC portal milling machine Roboteus RBF2030V
The machine was purchased in 2026 and has only been tested for 5 hours.
Therefore, it is in like-new condition.
Spindle: 4.5 kW (equipped with the more powerful motor)
Working area (x, y, z): 2000 x 3000 x 200 mm
Work table: Grid table with 9 sections and 4 T-slot rails
Spindle speed: 24,000 rpm
Guideways: HIWIN HGR20 linear rails
Ijdj Akc Dzspfx Adwstp
Drives: Helical racks (X, Y), ball screw
2010 (Z) + hybrid stepper motors 12 Nm with encoder
Controller: HXC Motion control 2MHz
Control: Mach3
Interface: USB
Tool holder: ER25 collet
Positioning accuracy: < 0.03 / 300 mm
Working speed: < 9000 mm/min
The machine can, of course, be inspected and thoroughly tested while powered on.
The sale is to commercial businesses only, excluding any liability for material defects. No guarantee, warranty, or right of return.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The machine was purchased in 2026 and has only been tested for 5 hours.
Therefore, it is in like-new condition.
Spindle: 4.5 kW (equipped with the more powerful motor)
Working area (x, y, z): 2000 x 3000 x 200 mm
Work table: Grid table with 9 sections and 4 T-slot rails
Spindle speed: 24,000 rpm
Guideways: HIWIN HGR20 linear rails
Ijdj Akc Dzspfx Adwstp
Drives: Helical racks (X, Y), ball screw
2010 (Z) + hybrid stepper motors 12 Nm with encoder
Controller: HXC Motion control 2MHz
Control: Mach3
Interface: USB
Tool holder: ER25 collet
Positioning accuracy: < 0.03 / 300 mm
Working speed: < 9000 mm/min
The machine can, of course, be inspected and thoroughly tested while powered on.
The sale is to commercial businesses only, excluding any liability for material defects. No guarantee, warranty, or right of return.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2004
۲۴ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 2162 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Kežmarok
۳٬۳۲۳ km
CosmecNR/E
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است





























