5-axis machining center

Reiden RX10

Standard configuration: Control and operation:
• Control system: HEIDENHAIN TNC 640
- Handwheel: HEIDENHAIN HR510
- Swiveling control panel with two 19" monitors
- 3 potentiometers (feed rate, rapid traverse, speed)
- 3-color status indicator light
- HEIDENHAIN DCM; collision monitoring between the machine and the tool

Standard configuration: Machine:
- Travel range, X-axis = 1,000 mm
- Travel range, Y-axis = 1,100 mm
- Travel range, Z-axis = 810 mm
- NC rotary table 1,000 x 800 mm with T-slots 18H7 / 100 mm, driven by a pre-loaded worm gear drive
- Swivel range 1,350 mm

- Direct measuring systems on all axes, manufactured by HEIDENHAIN, connected to the pneumatic system
- Micro-Epsilon "Spindle Growth System" for detecting and dynamically compensating for thermally induced spindle growth

- Full enclosure with a large angled door for crane loading and a quick-access door
- View windows in the working area made of laminated safety glass
- Coolant nozzle

- Oil collection pan made of chrome steel sheet
- Leveling elements
- Machine paint: Blue and light gray

Milling head:
- Automatic horizontal/vertical swiveling milling head as a full-fledged, stepless NC axis from -1° to +90°
- Speed: 16,000 min-1
- Main drive: 38 kW (100% duty cycle)
- Torque: 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle)
- Tool holder: HSK 63-A
Nsdpfx Alezzp Tao Nslh

Coolant supply:
- Internal coolant supply: 30 bar, Form A, paper band filter and high-performance filter with integrated chip extraction system
- Milling head external cooling via nozzle ring

Tool changer:
- Rack magazine with 85 positions
- 5-position tool loading station
- Dialog-based operating panel

Chip removal:
- Scraper conveyor for chip removal at the front along the machine bed, chip discharge height 1,100 mm
Documentation:
- Acceptance test report for circularity test, laser inspection
- Technical documentation in duplicate
- CE declaration of conformity

Milling head:
Compressed air through the spindle center
The compressed air can be selected via an M-function.

Internal coolant supply with paper band filter:
- Internal coolant supply with 80 bar (Form A) with
20 l/min, incl. paper band filter, coolant nozzle,
and additional fine filter, particle size minimal 40 µm. Pressure regulation for each tool via
tool table or a switch on the control panel during operation.

Measuring probe and tool measurement:
- Radio measuring probe BLUM TC60
incl. software adaptation, fully set up,
incl. KinematicsOpt and calibration sphere on
magnetic stand
- TRS2 tool breakage detection system
non-contact.
Only suitable for tools with a solid core from 2 mm, e.g. drills, tapping drills.

Additional machine options:
- Oil and emulsion mist extraction
Mechanical air filter
1,800 m3/h suction capacity
- DXF converter
- HEIDENHAIN AFC
"Adaptive Feed Control"
adaptive feed rate control
- HEIDENHAIN ACC
"Active Chatter Control"
active chatter suppression

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.