Automatic water purification centrifugeRösler
RZ 150 A
Automatic water purification centrifuge
Rösler
RZ 150 A
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۳۶٬۹۰۰
سال ساخت
۲۰۲۱
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Gliwice 

اطلاعات دستگاه
- نام دستگاه:
- Automatic water purification centrifuge
- تولید کننده:
- Rösler
- مدل:
- RZ 150 A
- سال ساخت:
- ۲۰۲۱
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۳۶٬۹۰۰
- موقعیت:
- Gliwice, لهستان

تماس بگیرید
جزئیات فنی
- ارتفاع کل:
- ۲٬۲۰۰ میلیمتر
- طول کل:
- ۱٬۷۰۰ میلیمتر
- عرض کل:
- ۱٬۱۰۰ میلیمتر
- حداکثر سرعت چرخش:
- ۲٬۶۵۰ دور/دقیقه
- قدرت:
- ۱٫۶ کیلووات (۲٫۱۸ اسب بخار)
- ظرفیت مخزن آب:
- ۱۰۰ ل
جزئیات پیشنهاد
- شناسه آگهی:
- A22086348
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۹.۰۳.۱۴۰۵
توضیحات
RÖSLER RZ 150 A cleaning system – automatic sludge removal
For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability.
Key parameters:
• Dimensions: 1700 x 1100 x 2200 mm
• Power: 1.6 kW
• Rotor speed: 2650 rpm
• Rotor made of aluminum alloy
• Steel housing
Equipment and functions:
• Smooth start and stop thanks to the frequency inverter
• Adjustable sludge removal speed
• Automatic retraction of the cleaning blade
• Automatic removal of remaining water
• Electronic vibration control
• Automatic rotor flushing
• Special bearing lubrication system to extend the unit's service life
Central control unit E61-400:
• Control and monitoring of the cleaning system
• E61-400 control unit
• SIEMENS S7-1200 controller
• Ensures automatic and stable operation of the entire system
Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge.
Additional system equipment:
• Sandpiper P9 diaphragm pump for supplying water to the centrifuge
• Pump operation cycle control
• Water level control in the tank
The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge.
The tank is required if the centrifuge is located far from the source of dirty water.
P 100 SB-P9 buffer tank:
• Height: 700 mm
• Capacity: 100 l
• Designed for transporting dirty water and rotor flushing water to the buffer tank
• Made of durable HDPE polyethylene (black color)
• Sloping, 3-sided funnel-shaped bottom
• P9 diaphragm pump – operating pressure 4 bar
• Water level control
Dusdpfjzca Apjx Anzeu
RSKM 30 waste container:
• Capacity: 300 l
• Dimensions: 1300 x 820 x 800 mm
• Manual operation
• Can be transported and emptied using a forklift
• Made of steel
• Discharge port with drain plug
• Equipped with a tilting mechanism
The unit is robust, efficient, and ready for operation.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability.
Key parameters:
• Dimensions: 1700 x 1100 x 2200 mm
• Power: 1.6 kW
• Rotor speed: 2650 rpm
• Rotor made of aluminum alloy
• Steel housing
Equipment and functions:
• Smooth start and stop thanks to the frequency inverter
• Adjustable sludge removal speed
• Automatic retraction of the cleaning blade
• Automatic removal of remaining water
• Electronic vibration control
• Automatic rotor flushing
• Special bearing lubrication system to extend the unit's service life
Central control unit E61-400:
• Control and monitoring of the cleaning system
• E61-400 control unit
• SIEMENS S7-1200 controller
• Ensures automatic and stable operation of the entire system
Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge.
Additional system equipment:
• Sandpiper P9 diaphragm pump for supplying water to the centrifuge
• Pump operation cycle control
• Water level control in the tank
The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge.
The tank is required if the centrifuge is located far from the source of dirty water.
P 100 SB-P9 buffer tank:
• Height: 700 mm
• Capacity: 100 l
• Designed for transporting dirty water and rotor flushing water to the buffer tank
• Made of durable HDPE polyethylene (black color)
• Sloping, 3-sided funnel-shaped bottom
• P9 diaphragm pump – operating pressure 4 bar
• Water level control
Dusdpfjzca Apjx Anzeu
RSKM 30 waste container:
• Capacity: 300 l
• Dimensions: 1300 x 820 x 800 mm
• Manual operation
• Can be transported and emptied using a forklift
• Made of steel
• Discharge port with drain plug
• Equipped with a tilting mechanism
The unit is robust, efficient, and ready for operation.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2019
۲ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+48 602 1... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است






















