Tube Mill 80x3 QTC Quick change

OTO MILLS Línea de tubos 80x3 QTC Cambio rápido

HEAVY-DUTY HIGH-PERFORMANCE TUBE MILL OTO 80.3 QTC
With complete Quick Tool Change System
Made by OTO MILLS

PRODUCTION RANGE
• Diameter range 19mm – 80mm
• Thickness 0.8mm to 3.2mm
• Speed Max. 150 m/min
• Working direction Left - Right

Scope of supply:

1. Entry Line made OTO MILLS with:
• Double Uncoiler OTOAD256 -PA
• Double strip peeler for opening from top/bottom
• Automatic strip joiner OTO GG254
• Floop vertical accumulator

2. OTO 80.3 QTC tube mill made OTO MILLS with:
• Casted Iron stand
• Bottom shaft height adjustable
• Reinforced motor and gearboxes 2-speed transmission
• Hydraulic nuts
• Double length cooling tunnel
• Motorised turk-head for fast adjustment

3. Quick change rafted system OTO QTC - 2nd set of cassettes off-line including :
• 1 complete cassette for forming
• 1 complete cassette for fin-pass
• 1 complete cassette for sizing
• Quick – plug automatic cardan connections

4. 150 m/min Flying saw – High Speed cold saw OTO TCCG160 with :
• Carriage motion with 70kW motor
• Cutting head motion with hydraulic control
• AC Rotation of the blade

5. Automatic packer MAIR SQ.HEX.90.D.5.SL with emulsion draining and bundle weighting system
• Possibility to make hexagonal and square/rectangular bundles
• 5 modules for production of tubes 4-10m (12m for thickness >1.8mm)
• Including emulsion draining, and weighting unit
• 3 chains for finished bundle storage
• Test tube zone, with cutting saw for the test tube

6. Automatic strapping unit SIGNODE M400

7. Zinc spraying METALISATION 250
• 1 metallisation cabin
• 1 zinc spraying unit METALLISATION ENERGIZER 250
• 1 Zinc spraying gun ARCSRPAY 528E

8. Fume exhaust system
• Fume exhaust conducts and exhaust covers on the required points a
• Filter for fumes

9. Complete set of rolls (*See details)

NEW PARTS SUPPLIED IN 2023/2024:

10. Thermatool CFI 350-VF Solid state welder with :
• Automatch
• Selectable frequency 250-400kHz
• Thermaview control panel

11. Cooler PARKER, Model hyprechill Maxi

12. Inner scarfing hydraulical Blissenbach, with all the toolding for ID 30-50m

13. OPTRONIC CNC control unit for driving flying saw (Switzerland)

14. New Emulsion plant with :
• Pump and heat exchanger
• Fillters
• Electrical controls and monitoring

Gcodpfxjvr Tnto Adhsa
15. New motor and electritical cabinet for accumulator

16. New motor and control for sizing section