Membrane vakuumpress OPTIMAT FACTOR

OPTIMAT FACTOR

By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element.
The process is widely used in factories producing furniture, windows, doors and coffins.
The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts.
Heaters power 2x2.5 = 5 kW
Kfodpfjgp I Upox Afpsa
Vacuum pump power 0.75 kW
Working voltage 400V
Number of phases 3
Operating voltage frequency 50 Hz
Working vacuum - 0.8 ± 0.05 bar
Working temperature 40-50 ± 5 ° С
Maximum temperature 60 ± 5 ° С
Length 3050 mm
Width 1350 mm
Height 1600 mm
Protection degree IP2X
Noise level ≤ 70 dB
Weight 350-400 kg
Vacuum pump capacity 25 m3 / h
Working dimension 3000 x 1350 mm
700% stretch of the membrane
Diaphragm thickness 2.7 mm (+/- 0.20 mm)