Automatic packaging wood flats conveyor

NMTEH SIA

Automatic packaging line with feeding to a film wrapping machine
The line is intended for feeding wood flats and door laths for stamping, and forming packs according to specific parameters.
(Modifications are possible according to the customer’s needs and dimensions of boards)
The principle of line operation:
flats are placed on the line and evened by placing them against the stop on the right side.
Then the separator separates flats from one another to ensure that they are fed one by one to the stamping ( marking ) machine where a stamp is affixed. The laths are forwarded to the reverser, which turns each lath over according to the program settings.
A pack is piled according to the number of laths and with a reversed last lath or several last laths according to the program settings.
Redev Dit Nopfx Abvsn
After forming a pack the line stops while the pack is transferred to the film wrapping machine.
After lowering the pack to the feeding conveyor of the film wrapping machine, the next pack can be formed.
A signal from the film wrapping machine serves as permission for feeding the next pack to the film wrapping machine.