Vacuum press

MSM VPS 3514 Professional

New machine

Year of manufacture: 2026

The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm.

Technical standard equipment of the vacuum press:

Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges.

Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area.

The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame.

Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine.

The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length.

Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service.

Summary of key data:
Iisdoywpt Ispfx Apveb

- Welded frame construction
- Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C
- MDF vacuum distribution plate
- Digital vacuum control VAK-CONTROL 1 with auto shut-off
- Vacuum pump: 40 m³/h, oil lubricated
- Max. vacuum: -0.99 bar
- Max. pressing pressure up to 9.9 t/m²
- Connected load: 1.40 kW (400 Volt)
- Vacuum tank: 200 liters
- 4 swivel castors with locks
- Additional 13 mm vacuum connection
- Pressing area: 3500 x 1420 mm
- Table height to vacuum distributor plate: approx. 895 mm
- Machine height closed: approx. 960 mm
- Machine height closed with cover plate: approx. 1030 mm
- Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH)
- Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH)

Commodity code: 84659400
Net weight: 570 kg
Gross weight: 660 kg
Includes cover plate 3514

With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company.
- Coated cover plate
- Solid welded steel frame
- Opening support by gas pressure springs
Commodity code: 84669280
Net weight: 105 kg
Gross weight: 105 kg
The cover plate is only available in combination with a vacuum press.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.