Lathe - cycle-controlledMICROTURN (Buffalo)
Challenger BNC-1860

اطلاعات دستگاه
- نام دستگاه:
- Lathe - cycle-controlled
- تولید کننده:
- MICROTURN (Buffalo)
- سال ساخت:
- ۲۰۰۸
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
جزئیات فنی
- طول تراشکاری:
- ۱٬۵۰۰ میلیمتر
- قطر چرخیدن بر روی بستر کشویی:
- ۴۷۵ میلیمتر
- حداکثر سرعت چرخش:
- ۴٬۵۰۰ دور/دقیقه
- مسافت جابجایی محور X:
- ۲۶۰ میلیمتر
- مسافت حرکت محور Z:
- ۱٬۶۸۰ میلیمتر
ارائه
- موقعیت:
- Bayern, آلمان
– فاصله: حدود ۴٬۰۱۵ کیلومتر
- در دسترس بودن:
- بلافاصله پس از پایان حراج
- شرایط تحویل:
- FCA
€۱٬۰۰۰٫۰۰ (الزامی)
رایگان
توضیحات
The bid obliges you to pick up the item on time by March 31, 2025!
TECHNICAL DETAILS
Control: Fagor CNC 8055
Turning diameter over recess: 710 mm
Turning diameter over cross slide: 240 mm
Turning diameter over bed: 475 mm
Max. turning length (with turret): 1,500 mm
spindle
Bar capacity: 51 mm
Recess of spindle nose: 248 mm
spindle nose: ASA D1-6
spindle bore: 65 mm
Speed range: 100 - 4,500 rpm
Spindle power: 11 kW
Max. torque: 29.3 kgm
tool handling
Tool slots: 8
Shaft height square tool: 25 mm
Shank diameter for boring bar: 40 mm
Tool holder: VDI 30
Indexing time: 0.42 s
travel paths
X-axis: 260 mm
Z-axis: 1,680 mm
rapid traverse speeds
Rapid traverse X-axis: 15 m/min
Rapid traverse Z-axis: 15 m/min
tailstock
Max. workpiece weight (with tailstock): 1,500 kg
Tailstock quill taper: MK 5
quill range: 150 m
quill diameter: 80 mm
spindle taper: MK 5
Bed width: 355 mm
X-axis motor: 7.3 Nm
Z-axis motor: 11.9 Nm
Chuck dimensions: 200/4,000 mm
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
پرداختها
- هزینههای جانبی خرید:
- ۱۸ %
- شرایط پرداخت:
- ۱۰۰٪ پیشپرداخت
- روشهای پرداخت:
انتقال بانکی
جزئیات پیشنهاد
- شناسه آگهی:
- A18682461
- شماره مرجع:
- AUC-2503055
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۲.۱۲.۱۴۰۳
- پیشنهاد انحصاری:
- فقط در مزایده موجود است
بازدید
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.