Band saw

MEBA 320 G HSS

Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc.

Semi-automatic sawing cycle with workpiece clamping, sawing, and frame lifting to pre-set height after completion of the cut.
Stepless hydraulic monitoring of cutting pressure and feed at the saw band feed. This ensures optimal conditions for every sawing task, i.e., constant pressure with solid material and constant feed with thin-walled profiles.
Especially suitable for universal applications with varying cross-sections, materials, and frequent miter cuts.
Machine control in compliance with CE standard 89/289.

Technical Data:
Round/Flat
90° 325/500 x 300
45° 300/300 x 300
Kedpfjhppabex Agbolp
30° 200/200 x 200

Rapid downfeed of the saw frame to material edge via push button
Manual miter adjustment from 90° to 30°, stepless via scale
The miter rotation point is at the intersection between saw band and fixed vice jaw, thus no change in length measurement with changing angle positions
Hydraulic full-stroke workpiece clamping - CETOP hydraulic system
At every saw frame angle, the material is clamped parallel at 90°
Complete coolant system with electric immersion pump
Centralized machine controls
Saw band drive with end-stop
Movable band guide arm, adjustable to material width
Saw band deflection wheels – carbide guides
Powered chip cleaning brush
Saw band tensioning with torque wrench
Paint finish: silver grey/blue grey (RAL 7001/RAL 7031)
Remnant piece length: 25mm
Cutting speed:
AC frequency-controlled drive 15-150 m/min, steplessly adjustable at the control panel
Drive:
Saw band 3.0kW; 400V, 50Hz
Hydraulics 1.1kW
Coolant pump 0.1kW
Saw frame feed:
Stepless up to 300mm/min, hydraulically controlled
Saw band tensioning: Mechanical with torque wrench
Saw band dimensions: 4200x34x1.1mm
Working height: 750mm (without installation elements)

Weight: 850kg
Dimensions (LxWxH): 1300x2050x1400mm

The following options are available:
Laser guide
Micro-spray device
Clamping pressure regulator
Support table on the infeed side

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.