Vulcanizing press or heating press

ME-Pressen Heizpresse 30T

Hydraulic press for versatile use as an assembly press, small series press, manual insertion press or heating press in double column press design (H-press)
The press can be inspected at the Ennepetal warehouse. It is a 2.5 year old, unused press without operating hours, which is sold with full warranty.
List price: 45.000 € for a special price of 28.000 €

Technical details:


Robust machine frame
Capacity: 30 tons - at 300 bar
Pump ASC: 28.5 liters/min.
Engine: 11 kW - 15 hp
Hedpfx Acou U Ey Ieyonu
Oil tank: 600 × 450 × 500 mm - with approx. 100 liters
Cylinder piston: Ø 110 mm
Cylinder inside: Ø 70 mm
Stroke: 500 mm
Forward speed: 45 mm/s
Return speed: 55 mm/s
Guides: Ø 50 mm
Table top: 800 × 550 mm - with T-slots
Plunger plate: 700 × 500 mm - with T-slots
Total weight: 2000 kg
Valves from BoschRexroth
Control cabinet technology from renowned manufacturers
Table size of the press table 700 × 500 × 70 mm
Table height 800 mm, from hall floor
Cylinder dimensions / piston rod 110 / 75 mm
Plunger size 700 × 500 × 80 mm
Emergency switch
Rear protective cladding made of painted mesh
Lighting in the press area
Closed at the rear and sides
500 mm high light curtain with 14 mm resolution (finger protection)
Maximum distance between table top and ram 500 mm
Cylinder travel 500 mm
Front open width 820 mm
Press pressure adjustable from 5 to 30 T via rotary control
Travel speed downwards 50 mm, upwards 40 mm per second
Total weight approx. 2000 kg
Paintwork in RAL (light gray) 7035 and RAL 2009 (orange)
Assembly, commissioning, instruction for a separate charge
CE declaration and documentation in German
Plunger plate with two guide columns
Resettable piece counter
Position limitation via cam switch
Adjustable two-hand control with 3 m supply cable
Safety test with certificate from an authorized company
There are movable sensors on the right-hand side to limit the travel distance. These can be used to set a specific travel distance, for example 300 mm. The press then automatically moves up to the preset point at the touch of a button.
The ram plate is guided by 2 guide columns.
The rear of the press is closed, but equipped with air outlet openings.
There is an ejection chute in the table.
Light barrier with under-grip protection.
Mountable overgrip protection.
Optional: 2 heating plates, 500 × 500 mm heating surface, total size 550 × 550 mm, with controller, up to 200 degrees, incl. insulating plate, 20 mm thick, with timer
Optional: Commissioning and training

Delivery time
Currently a delivery time of approx. 2 weeks is to be expected (without heating plates)
Heating plate delivery time approx. 4 weeks.
Customer service:
From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.