Universal machining center

MATEC MATEC 30HV/NC

MATEC 30HV/NC
X = 2,000 mm
Y = 825 mm
Z = 800 mm / horizontal
Z = 675 mm / vertical

- 1-axis CNC swivel head
Swivel radius 300 mm, swivel angle max. +/- 105 degrees
Direct path measuring system +/-3, optionally continuous or
indexed with clamping
Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped
- Electronic handwheel (portable)
- Remote diagnosis / remote maintenance
- Tool magazine with 48 positions
- Additional tool magazine with 216 positions
Fixed tool magazine for loading the internal tool changer
of a machine tool.
Including:
- Linear and rotary axes with drives
- Controllers and sensors
- Gripper for tool holder SK40
- Sheet steel enclosure
- 6 tool levels for storing up to
216 tools with SK40 holders
D = 80 mm or D = 160 mm if adjacent slots are free, comprising:
40 pcs. with L = 430 mm
64 pcs. with L = 260 mm
112 pcs. with L = 160 mm
Maximum tool weight: 10 kg
- Tool loading and unloading via tool flap
- Transfer to machine via double gripper
- Tool data entry via the machine operating panel,
selection of tool positions via the operating panel of the additional magazine
- Option:
Operating panel for tool data entry at additional magazine

- Additional price for motor spindle 9,000 rpm
Motor spindle with 30 kW (40% duty cycle)
17 kW (100% duty cycle)
Torque 191 Nm (40% duty cycle)
108 Nm (100% duty cycle)
- Internal coolant supply 20 bar
- Internal coolant supply 40 bar
- Compressed air to external nozzles
Itjdjxg D Atspfx Aazjb
- Internal compressed air through tool
- Rotoclear
- Automatic safety doors
- HOWIMAT CNC 220.2/TMI-50 rotary table
1-axis precision indexing table
with direct drive
Indexing accuracy deviation
max. +/- 10 seconds
Radial/axial runout deviation
max. +/- 0.003 mm
- Single rotary union for rotary table or counter bearing
- Zero-point clamping system integrated in the machine table,
without draw studs and cover.
- Tool breakage monitoring
- Fully enclosed work area with roof
- Bellows with steel lamellae
- Direct measuring system X-, Y-, Z-axis
- Chip conveyor
- Rinsing gun
- Centralized oil lubrication
- Work area lighting
- Installation elements

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.