Machining center Masterwood MASTERWOOD MasterDrill TF 600 SA (2020)

MASTERWOOD MasterDrill TF 600 SA

- Milling spindle 2 x 3.5 kW
- Upper and lower drilling heads
- Dado saw
- Barcode reader

Used machining center
Manufacturer: Masterwood
Type: MasterDrill TF 600 SA
Year of manufacture: 2020
With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides.
The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min.
Minimum and maximum workpiece dimensions:
- Workpiece thickness: 8 ~ 60 mm
- Workpiece length: 400 ~ 2500 mm
- Workpiece width: 400 ~ 950 mm

Drilling heads:
- The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance.

Upper drilling heads:
- Vertical drills in X direction: 7+7
- Vertical drills in Y direction: 5+5
- Horizontal drills in X direction: 2x2 + 2+2
- Horizontal drills in Y direction: 2+2

Lower drilling head:
- Vertical drills: 3x3

Dado saw:
- A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm.

Milling spindle 2 x 3.5 kW:
Technical data:
Djdszux T Njpfx Aa Isku
- Maximum power: 3.5 kW
- Maximum speed: 18,000 rpm
- Clockwise/counterclockwise rotation
- Operation via inverter
- Tool holder ER 25
- Air cooling

The positioning accuracy of the units is +/- 1/10 mm
Automatic workpiece discharge:
Motorized conveyor belt with sensor control.
CNC and software:
- The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit.

The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel.
Masterwork:
- Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML.

Master Drill: Human-machine interface for managing operational activities (maintenance/setup).
Trepan: An interface that the operator uses for manual and setup operations.
Barcode reader:
- Motorized roller conveyor for feeding workpieces into the infeed.
- CAM start software package for Masterwood TF 600 SA
- Automatic barcode scanner at the infeed

Note:
The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.