جرثقیل نصب‌شده روی کامیون

MAN TGS 35.520 8x2 Hydrodrive 8x4. Fassi F805 techno

Brand new MAN truck with detachable side wall body and Fassi loading crane

Type: TGS 35.520 8x2H-6 BL CH
MAN HydroDrive, hydrostatic axle drive

Cab: XLX (narrow, long, normal height)
Cab suspension, Comfort
Lift roof, mechanical
Bumper, steel, 3-part
Front access, integrated, with handhold
Windshield, laminated safety glass (LSG), tinted
Sun visor, in front of windshield
Seat covers, textile, Comfort
Driver's seat package Premium, air-suspended, seat heating
Driver comfort seat, air-suspended, with lumbar support and shoulder adjustment
Seat heating, driver's seat
Multifunction steering wheel, height and tilt adjustable
Instrument panel Professional 12.3 inches
1 bunk
Refrigerator
MAN sound system
MAN TipMatic 12.28 OD
Transmission for increased traction in driving operation
Operation MAN TipMatic, with steering column lever, manual (DNR selection, shift strategy selection)
Transmission function MAN Idle Speed Driving
Transmission function Freewheeling
Driving program MAN TipMatic Performance and Efficiency, up to 70,000 kg
Driving program MAN TipMatic Offroad, up to 70,000 kg
Driving program MAN TipMatic Manoeuvre, maneuvering mode
Differential locks on driven rear axles
Trailer coupling
Air horns
Rotating beacons
Additional and work spotlights
Mirror package
Rear view camera system
Diesel tank aluminum 390 l

Crane type: F805R.27 hxp-techno + JIB L436

XF system (Extra Fast), XP system (Extra Power) and FL system (Full Lift) for optimized working speed and performance
Danfoss D900 control block with four control valves on the crane pillar, incl. emergency operation
FASSI V7S radio remote control with linear levers, display of pressure values (bar and %) as well as 90% / 100% warning in the display
Hydraulic outriggers, can be extended hydraulically on both sides, outrigger width 8.29 m
Outriggers can be operated by radio (black/white), emergency operation on the base
Separate, hydraulically extendable additional outrigger support
Outrigger width 6.90 m, with FSC-SL2, for mounting below the vehicle frame
Winch V20
AWC, permanent rope pulley
Additional jib L436, 6-fold hydraulically extendable
Jib Double Power (JDP)
Body: Crane front mounting
Bolted fifth wheel coupling, adjustable
Flatbed body as steel/welded construction, detachable design
Dimensions: Length approx. 4250 mm x width x 2480 mm, A-dimension 9,200 mm. Body in frame
Folding aluminum side walls 800 mm high, "tipper side wall" design without spring assistance
Flatbed floor with diamond-plate steel 4mm
8x recessed lashing points per side 2500 daN,
Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height 1000 mm, steel galvanized design.
Inside with storage trays for the lashing points (70x70mm)
Fenders, aluminum diamond-plate design
Multisafe lashing point pockets - 2 rows across the entire width of the flatbed
Tool boxes, aluminum diamond-plate design
2 pcs. storage trays with top cover (1x left and 1x right) on the additional outrigger made of diamond-plate steel
Mounts (for support plates, crane plates) galvanized
Mounting of an underrun protection at the rear and the additional outrigger, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics
Nsdpfx Ao Afa D Iol Nown
Mounts (for support plates, crane plates) made of steel, galvanized.

Hydraulic front outrigger for 360° operating range

Further information on request.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.