MAKA PM 270 X CNC milling and drilling machine (2012)

MAKA PM 270 X

- Work area: X: 9000 mm / Y: 2700 mm
- Gantry 1: 5-axis milling spindle 20/26 kW
- 32-position tool changer
- Gantry 2: 2x13 spindle drilling unit

Technical data
- Heavy-duty gantry system with 2 gantries
- Gantries with drives on both sides (gantry drive)
- CNC control SIEMENS 840D sl / PCU 50 with NCU 730
- Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis

Work area / machinable cube size with tool length/diameter of 160 mm
- X-axis: 9000 mm with both gantries
- Y-axis: 2700 mm
- Z-axis: (Standard cube size 420 mm)
- Customer-specific design for workpiece thicknesses up to 60 mm
- 5-axis head

Equipment, Gantry 1
- 1 universal head for 5-axis milling
- Milling spindle power: 20/26 kW (S1/S6)
- Speed adjustable up to 24,000 rpm
- Water-cooled
- Tool interface HSK F63 for automatic tool changes
- Thread cutting is possible!

- 1 chain-type tool magazine with 32 positions
- With rotary gripper for fast tool changes
- Magazine fixed on the operator side

Equipment, Gantry 2
- 2 head mounting brackets
- Equipped with 2 heavy-duty multi-spindle drilling units each
- With common dust extraction hood
- Each drilling unit with 13 drilling spindles (total of 26 drilling spindles)
- Individually selectable vertically
- Arrangement in an L-shape

- 2 angled drilling spindles adjustable from 0 - 25°
- 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm
- Drill chuck collet Rego Fix ER 25 M

Machine table
- Base frame with linear guide
- 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives
- Vacuum supply integrated into the table traverse
- Each traverse is individually vacuum-monitored and linked to the machine control system

Workpiece infeed function
- 1 belt conveyor consisting of 4 belt strands
- Width 40 mm, each traverse with lifting devices
- Lifting device NC-controlled
- Stroke 110 mm (+10 mm, -100 mm)
- The machine should be installed in a foundation pit of approx. 300 mm
- Vacuum pump Bush type: Mink MM 1322
- Suction capacity 250 m³/h
- With intermediate tank 500 l for rapid vacuum generation
- 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm
- Automatic central lubrication

Fjdszuw Ixspfx Aa Isgh
Work safety
- Moving protective cabin on both gantries
- Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.