Machining center

MAKA HC 57R

MAKA HC 57 robot, for 5-axis machining
Year of manufacture: 1999
Nwsdpfx Akjzwk Tajxok
Machine in gantry design with rack and pinion drive.

Technical data:
CNC control BWO 900C, for 5-axis machining.
Integrated PC with 1 MB memory and 3.5" floppy disk drive.
Mobile control panel.

Machine table approx. 6,000 x approx. 1,270 mm.
Working areas / machinable cube size
with tool D 160 / length 160 mm:

Y-axis: approx. 6,000 mm in 3-axis operation, approx. 5,700 mm in 5-axis operation
X-axis: approx. 1,050 mm in 5-axis operation
Z-axis: approx. 190 mm / travel approx. 420 mm
A-axis: 540°
B-axis: 360° (swivel axis +/- 180°)

Rapid traverse speed
X/Y-axis: 45 m/min.
Z-axis: 10 m/min.

1 universal head for 5-axis milling, with 50° angled head,
power max. 12.5 kW, speed continuously variable, adjustable up to 17,000 rpm.
Milling spindle liquid-cooled.

Chip extraction system with slat curtain and suction nozzle
for room air extraction for 5-axis operation and swiveling extraction for 3-axis operation.

Tool interface ISO 40 for automatic tool changer system.
1 chain tool magazine with 24 spaces for tools up to D = 90 mm,
with sorted storage up to max. 160 mm. (Three spaces are required for this).

Machine table:
10 support tubes on linear guides with pneumatic release device for quick positioning.
2 control circuits for stops "Raise / Lower"
2 control circuits for e.g. sliding strip "Raise / Lower"
2 control circuits for pneumatics "Clamp / Release"
2 vacuum control circuits with button for clamping and automatic reset via CNC programming.
1 chip conveyor integrated in the table, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm.

Vacuum supply:
1 vacuum pump, including tank with 250 liter capacity for rapid vacuum build-up.

Other:
10 vacuum supports with various suction cups.
4 clamping devices for posts / curved parts, with pneumatic clamping.
4 pneumatic stops

Automatic central lubrication.
Control cabinet with air conditioning unit.

Work safety:
Moving protective cabin with safety bumpers on the operator side.
Any necessary safety measures for the rear of the machine must be provided by the customer.

The machine can be inspected in working order in the southern Germany region, near the A81 highway / Black Forest.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.