Carpenter s chain saw

Mafell ZSX-TWIN Ec

Exhibition machineDescription:The new ZSX-TWIN Ec carpentry chainsaw is the practical solution for large-dimensioned wood components. MAFELL has created a new dimension with the development of the twin-engine chain saw, with which previously almost impossible and time-consuming work can be implemented effortlessly and accurately. With a rated power of 3000 watts, even one CUprex motor brings the 230 V mains to its power limit. Two CUprex motors at the same time would bring any simply fused lighting power supply to its knees. If the power is distributed over two circuits, the two-motor ZSX gets the power it needs. This is precisely the power grid that offers us, since here the phases are fused separately from each other and the grid is therefore not antage Benefit:Thanks to the use of light current technology, the ZSX TWIN weighs only 20 kg with 6,000 watts of rated power. This enables it to make longitudinal cuts up to a cutting depth of 400 mm! In wood construction and solid wood wall cutting, corner cuts are often necessary. Thanks to the vertical cutting tool, cutouts and overlaps can be made quickly and accurately. Time-consuming turning of the wood components is no longer necessary. At the heart of the ZSX-TWIN Ec are the two 3,000-watt luminous flux motors. They are operated in parallel on two 230 V phases from the power grid. The ZSX can be swiveled from -15° to 60° exactly according to lication:Longitudinal and cross-sectional cutouts Material use e.g.: Solid wood, glue laminated beamsTechnical data:Cutting depth 400 mm Cutting depth at 15° 386 mm Cutting depth at 30° 346 mm Cutting depth at 45° 282 mm Cutting depth at 60° 199 mm Swiveling on both sides -15° - 60° Cutting width 6.8 mm Rated idle speed 21000 1/min. Nominal input 2 x 3000 W Weight 20,0 kgScope of delivery:1 Chain saw ZSX TWIN Ec 1 Longitudinal cutting chain TWIN HM 400 No.: 006977 1 Fine cutting chain HM 400 No.: 006972 1 Transport carriage ZSX-Twin Ec No..: 205940 1 Glider for guide bar insert No.: 205934 1 Rip fence No.: 204591 1 Combination screwdriver 6 mm No.: 093272 1 Open-end wrench 13 mm No.: 093008 1 Connection cable 10 m complete with CEE plug 400 V No.: 087906
Fgjdovwfy Sepfx Abnoh