Band sawMacc
SPECIAL 411 CSO
Band saw
Macc
SPECIAL 411 CSO
وضعیت
جدید
موقعیت
Concordia Sagittaria 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- Via Levada, 72, 30023 Concordia Sagittaria VE, Italia
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A4425790
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۲.۰۸.۱۴۰۳
توضیحات
Used MACC SPECIAL 411 CSO Gravity descent bandsaw
New CE
The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time.
- Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return.
- Vertical rotation on pivot with adjustable conical bearings without backlash
- Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw
- Appropriately sized flywheels
Lasdpfx Agoficb Tsneh
- Sturdy belt guides made of watertight bearings and adjustable widia plates
- Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control
- Vice with rapid approach device
- Accident prevention safety device on the flywheel cover, on the control knob and on the blade
- Hydraulic cylinder for controlled descent
- Cutting thickness 1,2 mm
- Cutting range 45° left 60° right
- Adjustable stop for cuts of the same size
- 24 V low voltage system
- 0.06 kW electric pump for belt cooling
- Pedestal with drawer for chips collection and extractable tank for the cooling liquid
- Machine predisposed
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
New CE
The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time.
- Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return.
- Vertical rotation on pivot with adjustable conical bearings without backlash
- Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw
- Appropriately sized flywheels
Lasdpfx Agoficb Tsneh
- Sturdy belt guides made of watertight bearings and adjustable widia plates
- Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control
- Vice with rapid approach device
- Accident prevention safety device on the flywheel cover, on the control knob and on the blade
- Hydraulic cylinder for controlled descent
- Cutting thickness 1,2 mm
- Cutting range 45° left 60° right
- Adjustable stop for cuts of the same size
- 24 V low voltage system
- 0.06 kW electric pump for belt cooling
- Pedestal with drawer for chips collection and extractable tank for the cooling liquid
- Machine predisposed
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2016
ارسال درخواست
تلفن & فکس
+39 0421 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است