Roll forming machine

LLC Evolutioner portable downspout pipe machine

Compact roll forming equipment for producing metal rainwater downpipes

This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel.

The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems.

The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type.

The machine is suitable for manufacturers of:

rectangular metal downspouts;
rainwater downpipes;
roof drainage systems;
gutter and downspout components;
roofing accessories;
façade and sheet-metal products;
custom cold-formed metal profiles.

Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required.

Fodpfx Aszrnxcoivepn
Custom profile dimensions

The finished profile is produced according to the customer’s drawing, sample or technical specification.

The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product.


The basic production process is:

Decoiler → Roll forming system → Manual saw cutting


Main advantages
Compact and portable construction
Custom tooling for the required downpipe size
Production directly from coated sheet steel
Suitable for pre-painted and galvanized material
Gradual roll forming with controlled material deformation
Low installed motor power
Simple operation and maintenance
Suitable for small-batch and regular production
Finished products can be cut to the required length
Reduced dependence on purchased ready-made downpipes
Suitable for workshops with limited production space
Material

The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm.

Depending on the agreed configuration, the machine may process:

pre-painted steel;
galvanized steel;
polymer-coated sheet steel;
other thin sheet-metal materials after technical approval.

The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed.

Technical specifications:

Machine type Portable roll forming machine
Finished product Rectangular metal downspout / downpipe
Profile dimensions According to customer specification
Material Coated sheet steel
Material thickness Approx. 0.4–0.5 mm
Forming speed Approx. 3–8 m/min
Main motor power 3 kW
Transmission Gear and sprocket drive
Auxiliary forming elements Polyurethane wheels
Cutting system Manual circular saw
Machine dimensions Approx. 2860 × 730 × 1160 mm
Machine weight Approx. 400 kg
Electrical supply 380 V, 50 Hz, 3-phase*

Compact machine design

This makes it suitable for:

roofing contractors;
rainwater system manufacturers;
sheet-metal workshops;
gutter and downpipe producers;
building component manufacturers;
small and medium-sized production facilities;
companies producing custom roofing accessories.
Scope of supply

A custom set of roll forming tools will then be designed for the required product.