Insulating glass production machinelisec
Inspection Lightwall
Insulating glass production machine
lisec
Inspection Lightwall
سال ساخت
۲۰۲۱
وضعیت
کارکرده
موقعیت
Maasmechelen 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Insulating glass production machine
- تولید کننده:
- lisec
- سال ساخت:
- ۲۰۲۱
- وضعیت:
- بسیار خوب (کارکرده)
قیمت و مکان
- موقعیت:
- Breitwaterstraat 22, 3630 Maasmechelen, BE
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A18625526
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۱.۱۲.۱۴۰۳
توضیحات
1. Switch on the wall and the electronics.
Do this by switching on the mean switch and the lightwall (on the back). So switch on the multimeters. See photos 1 and 2
2. Adjust the upper and lower beam to the right cell height. Do this with 2 people. See photo 3
3. Check if there is no power on the cables coming from the power beam. Use the multimeters for this.
4. Connect the cells with the cables.
5. Check the cells with the protocol “Q3 quality finished cell”.
6. Use the right voltages for the different products. 24V for ddLC and 46V for scatter.
7. When doing the capacity measurement, turn the black switching knob from “power” to “R/C”. When done turn it back to “power”
Kdsdpsv Ep U Aefx Agnsu
8. When you have ddLC cells use the lightwall and the rotatable polar.
9. If you have scatter cells remove the lightwall and use the spotlight. For swtiching on/of this spotlight you can use the remote control. See photo 4.
10. When you are done, please use the mainswitch to power down, and switch of the used lights.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Do this by switching on the mean switch and the lightwall (on the back). So switch on the multimeters. See photos 1 and 2
2. Adjust the upper and lower beam to the right cell height. Do this with 2 people. See photo 3
3. Check if there is no power on the cables coming from the power beam. Use the multimeters for this.
4. Connect the cells with the cables.
5. Check the cells with the protocol “Q3 quality finished cell”.
6. Use the right voltages for the different products. 24V for ddLC and 46V for scatter.
7. When doing the capacity measurement, turn the black switching knob from “power” to “R/C”. When done turn it back to “power”
Kdsdpsv Ep U Aefx Agnsu
8. When you have ddLC cells use the lightwall and the rotatable polar.
9. If you have scatter cells remove the lightwall and use the spotlight. For swtiching on/of this spotlight you can use the remote control. See photo 4.
10. When you are done, please use the mainswitch to power down, and switch of the used lights.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2019
ارسال درخواست
تلفن & فکس
+32 89 53... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است